Requirements For Using The Auto Provisioning Server; Auto Provisioning Server System Usage - ZyXEL Communications APS 1.0 Administrator's Manual

Auto Provisioning Administrator's Guide

1.3.1 Requirements for Using the Auto Provisioning Server

You need to do the following.
• Provide and maintain a CRM system (database) that:
Stores a record of VoIP subscriber device MAC addresses.
Generates a unique PIN code to map to each VoIP subscriber device MAC address.
Stores each subscriber's SIP number, user ID, password PIN code and MAC address.
Note: The auto provisioning server software package includes sample CRM server
software called the VoIP Subscribing System (VSS). See
87 for its database structure.
• Install the auto provisioning server software on a server (see
• Integrate the auto provisioning server with the CRM system. See
for how the auto provisioning server uses SOAP to communicate with the CRM system.
• Provide SIP numbers and PIN codes to the subscribers either through a card, information
sheet or other method.
• Use the
ZyXEL VoIP devices to get the configuration files from the server (see
21).

1.3.2 Auto Provisioning Server System Usage

The following figure and steps describe how auto provisioning works with the auto
provisioning server.
18
command in the Command Line Interface (CLI) to pre-configure the
autopro
Appendix D on page
Chapter 4 on page 43).
Appendix E on page 89
Chapter 2 on page
Chapter 1 Auto Provisioning