Auto Provisioning Server Installation; System Requirements; Requirements For Installation By Source Code; Installation Using The Installer Cd - ZyXEL Communications APS 1.0 Administrator's Manual

This chapter covers how to install the auto provisioning server software.

4.1 System Requirements

You need a minimum of the following in order to use the auto provisioning server software.
• CPU: Intel Xeon processor 3.4G X 2
• Hard Disk: U320 80GB, SCSI H.D.D *3 (Raid 5)
• Memory: ECC 2GB DDR400
• Network: Intel 100/1000MB Ethernet NIC
• OS: RHEL 4

4.2 Requirements for Installation by Source Code

The following applications must be installed prior to the installation of the auto provisioning
server software if you install it by source code:
• Apache Web Server
• PHP 4.3.1 + GD module + Mcrypt module
• MySQL 4.1

4.3 Installation Using the Installer CD

Note: Warning! The CD is auto-installing and will format and re-partition your
computer's hard drive. This will delete any data stored on the hard drive.
1 Set up your CD-ROM as the primary boot device in BIOS.
2 Insert the installation CD into the CD-ROM drive and turn on the system.
3 Just press enter to begin the installation.
Chapter 4 Auto Provisioning Server Installation
Auto Provisioning Server
Auto Provisioning Administrator's Guide
C
H A P T E R
Installation
4
43