Parts Included - GE JN327 Owner's Manual And Installation Instructions

DAMAGE – SHIPMENT/INSTALLATION
• If the unit is damaged in shipment, return the unit to the
store in which it was bought for repair or replacement.
• If the unit is damaged by the customer, repair or
replacement is the responsibility of the customer.
• If the unit is damaged by the installer (if other than
the customer), repair or replacement must be made
by arrangement between customer and installer.
MOUNTING SPACE
66" or more
from the floor
to the top of
the hood
NOTES:
• This range hood is for installation over ranges or
cooktops up to 36" wide.
• If you are going to vent your range hood to the
outside, see the "Ducting Requirements" section
for exhaust duct preparation.
Installation Instructions
Bottom edge of
cabinet needs
to be 30" or
more from
the cooking
surface
30"
min.
TOOLS YOU WILL NEED
Flat blade and Phillips
screwdrivers
Saw (saber or keyhole)
1/4" pivoting Pliers
hex socket
Caulking
Flashlight

PARTS INCLUDED

PART
Grease Filter only (JV338)
Charcoal Filter only
(JN327 and RN328)
Grease Filter and Charcoal
Filter (JV347, JV348 and JV367)
Mounting Screws
(8 - 18 x 3/4" Phillips pan head)
Exhaust Adaptor
(for 3 1 ⁄
Exhaust Adaptor Screw
(8 - 18 x 3/8 Phillips pan head
or hex head)
8
Pencil
Electric drill Metal snips
(in some
applications)
Tape measure Wire stripper
Level
1/4" Nutdriver
QUANTITY
" x 10" rect. venting)
4
Duct tape
1
1
2
4
1
1