Radius Accounting; Overview; Radius Accounting Messages - D-Link DFL-260E User Manual

2.3. RADIUS Accounting

2.3. RADIUS Accounting

2.3.1. Overview

The Central Database Approach
Within a network environment containing large numbers of users, it is advantageous to have one or
a cluster of central servers that maintain user account information and are responsible for
authentication and authorization tasks. The central database residing on such dedicated servers
contains all user credentials as well as details of connections. This significantly reducing
administration complexity.
The Remote Authentication Dial-in User Service (RADIUS) is an Authentication, Authorization and
Accounting (AAA) protocol widely used to implement this central database approach and is used by
NetDefendOS to implement user accounting.
RADIUS Architecture
The RADIUS protocol is based on a client/server architecture. The NetDefend Firewall acts as the
client of the RADIUS server, creating and sending requests to a dedicated server(s). In RADIUS
terminology the firewall acts as the Network Access Server (NAS).
For user authentication, the RADIUS server receives the requests, verifies the user's information by
consulting its database, and returns either an "accept" or "reject" reply to the requesting client.
With the RFC 2866 standard, RADIUS was extended to handle the delivery of accounting
information and this is the standard followed by NetDefendOS for user accounting. In this way, all
the benefits of centralized servers are thus extended to user connection accounting.
The usage of RADIUS for NetDefendOS authentication is discussed in Section 8.2, "Authentication
Setup".

2.3.2. RADIUS Accounting Messages

Message Generation
Statistics, such as number of bytes sent and received, and number of packets sent and received are
updated and stored throughout RADIUS sessions. All statistics are updated for an authenticated user
whenever a connection related to an authenticated user is closed.
When a new client session is started by a user establishing a new connection through the NetDefend
Firewall, NetDefendOS sends an AccountingRequest START message to a nominated RADIUS
server, to record the start of the new session. User account information is also delivered to the
RADIUS server. The server will send back an AccountingResponse message to NetDefendOS,
acknowledging that the message has been received.
When a user is no longer authenticated, for example, after the user logs out or the session time
expires, an AccountingRequest STOP message is sent by NetDefendOS containing the relevant
session statistics. The information included in these statistics is user configurable. The contents of
the START and STOP messages are described in detail below:
START Message Parameters
Parameters included in START messages sent by NetDefendOS are:
• Type - Marks this AccountingRequest as signalling the beginning of the service (START).
Chapter 2. Management and Maintenance
65