D-Link DFL-260E User Manual page 246
Network security firewall netdefendos version 2.40.00
Hide thumbs
Also See for DFL-260E:
- Reference manual (948 pages) ,
- Log reference manual (652 pages) ,
- User manual (552 pages)
Table of Contents
Advertisement
4.7.5. Advanced Settings for
Transparent Mode
Null Enet Sender
Defines what to do when receiving a packet that has the sender hardware (MAC) address in Ethernet
header set to null (0000:0000:0000). Options:
•
Drop - Drop packets
•
DropLog - Drop and log packets
Default: DropLog
Broadcast Enet Sender
Defines what to do when receiving a packet that has the sender hardware (MAC) address in Ethernet
header set to the broadcast Ethernet address (FFFF:FFFF:FFFF). Options:
•
Accept - Accept packet
•
AcceptLog - Accept packet and log
•
Rewrite - Rewrite to the MAC of the forwarding interface
•
RewriteLog - Rewrite to the MAC of the forwarding interface and log
•
Drop - Drop packets
•
DropLog - Drop and log packets
Default: DropLog
Multicast Enet Sender
Defines what to do when receiving a packet that has the sender hardware (MAC) address in Ethernet
header set to a multicast Ethernet address. Options:
•
Accept - Accept packet
•
AcceptLog - Accept packet and log
•
Rewrite - Rewrite to the MAC of the forwarding interface
•
RewriteLog - Rewrite to the MAC of the forwarding interface and log
•
Drop - Drop packets
•
DropLog - Drop and log packets
Default: DropLog
Relay Spanning-tree BPDUs
When set to Ignore all incoming STP, RSTP and MSTP BPDUs are relayed to all transparent
interfaces in the same routing table, except the incoming interface. Options:
•
Ignore - Let the packets pass but do not log
246
Chapter 4. Routing
Advertisement
Table of Contents
Troubleshooting
