Behringer EUROCOM AX6220 Specifications
Energy-efficient dsp-powered and ethernet/usb-controlled 3000/2600-watt low-impedance power amplifier
Hide thumbs
Also See for EUROCOM AX6220:
- Quick start manual (20 pages) ,
- Quick start manual (23 pages)
Advertisement
Quick Links
AX6240/AX6220
Energy-Efficient, DSP-Powered and Ethernet/USB-Controlled
2900/2000-Watt Low-Impedance amplifier
Features
• Ultra-reliable, dual-channel power amplifi er designed
for continuous operation in distributed music,
paging and AV applications
• State-of-the-art, energy-saving Switch-Mode Power
technology with up to 73% power efficiency drastically
reduces energy cost
• 2 transformerless, cool-running Class-H amplifiers
drive low-impedance loads down to 2 Ω
• High-performance DSP and 24-bit/96 kHz converters
deliver ultimate signal integrity and extreme
dynamic range
• DSP section features sophisticated delay, crossover,
EQ (8 parametric, 2 dynamic), dynamics processing and
lockable security settings
• Can be set up, controlled and monitored through
standard Ethernet network or on-site via front panel
USB connector
• Front panel LCD display enables setup and
adjustment without PC
• 2 line level inputs via 3-pin Euroblock or XLR/TRS
combination connectors
• NL4 type and screw-down binding post outputs for
ultimate flexbility and reliability
• Front panel VU metering, mute indication, system fault,
over-current or overdrive indicators and illuminated
master volume ring with clipping indication
• "Zero"-attack Limiters on all output channels with
independent DC and thermal overload protection
automatically protects amplifi er and speakers
Advertisement
Related Manuals for Behringer EUROCOM AX6220
Summary of Contents for Behringer EUROCOM AX6220
- Page 1 AX6240/AX6220 Energy-Efficient, DSP-Powered and Ethernet/USB-Controlled 2900/2000-Watt Low-Impedance amplifier Features • Ultra-reliable, dual-channel power amplifi er designed • NL4 type and screw-down binding post outputs for for continuous operation in distributed music, ultimate flexbility and reliability paging and AV applications • Front panel VU metering, mute indication, system fault, • State-of-the-art, energy-saving Switch-Mode Power over-current or overdrive indicators and illuminated technology with up to 73% power efficiency drastically master volume ring with clipping indication reduces energy cost • “Zero”-attack Limiters on all output channels with • 2 transformerless, cool-running Class-H amplifiers independent DC and thermal overload protection drive low-impedance loads down to 2 Ω automatically protects amplifi er and speakers • High-performance DSP and 24-bit/96 kHz converters deliver ultimate signal integrity and extreme dynamic range • DSP section features sophisticated delay, crossover, EQ (8 parametric, 2 dynamic), dynamics processing and lockable security settings • Can be set up, controlled and monitored through standard Ethernet network or on-site via front panel USB connector • Front panel LCD display enables setup and...
- Page 2 The AX6240 delivers up to 1500 watts RMS per channel be connected to speakers via professional twist-lock into loads down to 2 Ω, and up to 2900 watts RMS in connectors, banana plugs, or bare wire (binding post). bridged mono mode (4Ω). The AX6220 delivers up to A 2-pin Euroblock socket is provided for sequential power 1000 watts RMS per channel into loads down to 2 Ω, control and remote power on/off. All mating Euroblock and up to 2000 watts RMS in bridged mono mode (4 Ω). connectors are included, as are integrated rack ears and Both models utilize transformerless Class-H topology screw covers. Designed for high-power applications and state-of-the-art switch-mode power technology to in the most demanding installations, the Eurocom provide low noise and superior transient response while AX6240 and AX6220 offer maximum performance and reducing amplifier energy costs. Dual variable-speed fans unsurpassed value. create back-to-front ventilation to keep racks running cool, and ˝zero-attack˝ limiters combine with independent DC and thermal overload protections to safeguard the amplifiers and connected speaker systems. Featuring 24-bit/96 kHz converters to ensure flawless signal integrity, the AX6240/AX6220 processing section maintains an extremely broad dynamic range while offering sophisticated DSP options including delay, crossover, dynamics, and both parametric (8-band) and dynamic (2-band) EQ. Parameters may be set and stored using intuitive front-panel controls and the amber backlit LCD, which also displays meters and indicates muting, system fault, over-current, and overdrive. The front panel also has an illuminated master volume knob with a clipping indicator. For remote control and monitoring, BEHRINGER offers the powerful Amp Remote software application which may be run on PCs connected either locally via the front panel USB connector or remotely via rear-panel Ethernet. Changes to settings may be prevented with secure lockout.
-
Page 3: Technical Specifications
AX6240/AX6220 Energy-Efficient, DSP-Powered and Ethernet/USB-Controlled 2900/2000-Watt Low-Impedance amplifier Technical Specifications Power Output LO-Z AX6220 AX6240 • Indicators Power indicator LED ring illumination (yellow) Overload/Protection LED ring Peak, 1% THD, 1 kHz sine wave (red) LCD display VU meters, system fault, overcurrent / overdrive indicators Stereo (both channels driven) • Operating temperature... - Page 4 AX6240/AX6220 Energy-Efficient, DSP-Powered and Ethernet/USB-Controlled 2900/2000-Watt Low-Impedance amplifier Architect’s and Engineer’s Specifications Summary description: The amplifier shall be of Class H design with an energy-efficient switch-mode power supply and shall provide two low-impedance output channels in a 2U rack-mountable fan-cooled chassis with integrated DSP and remote Ethernet/USB control. Digital signal processing (DSP) incorporated into the amplifier shall include delay, crossover, dynamics, parametric EQ (8-band), and dynamic EQ (2-band). The amplifier's A/D and D/A converters shall be 24-bit/96 kHz. Controls and indicators shall include the following: • Master Encoder knob for setting volume and DSP parameters • Indicator ring for power (yellow) and clipping (flashing red) • LCD screen to display current DSP module and settings • Up and Down buttons to select DSP modules and parameters • Process button to select DSP processing modules • Setup button to select DSP parameters • Exit button to display the top-level DSP menu • AC power switch on rear-panel to turn amplifier on/off Connections to the amplifier shall include the following: • Remote power on/off on 2-pin Euroblock socket • Inputs A and B, balanced or unbalanced mic or line-level, on XLR/TRS combination jacks and on 3-pin Euroblock sockets • Outputs on NL4 panel connectors (twist-lock) and on binding posts (bare wire or banana plugs) • Ethernet on RJ45 jack for LAN connection...
- Page 5 Energy-Efficient, DSP-Powered and Ethernet/USB-Controlled 2900/2000-Watt Low-Impedance amplifier Architect’s and Engineer’s Specifications Continued Performance criteria met by the amplifier shall include: • RMS power output (1 kHz @ 1% THD, 4 Ω, bridged-mono) of 2900 W for AX6240 and 2000 W for AX6220 • Input sensitivity 1 V @ 4 Ohms • Input clipping of 11 Vrms (+23 dBu) • Overall gain (8 Ω) of 36 dB for AX6240 and 34 dB for AX6220 • Frequency Response (8 Ω) of 20 Hz-20 kHz, +0/-1 dB • Distortion (THD+N; 8 Ω) of less than 0.25% (1 W, 1 kHz) • Signal to Noise Ratio of 87/93 dB at 2 dBu/+22 dBu • Damping Factor (8 Ω) of greater than 220 • Crosstalk (1 kHz at rated power) of greater than -70 dB for AX6240 and -68 dB for AX6220 AC power requirements of the amplifier shall be 100 V (50/60Hz), 120 V (60Hz), or 220~240 V (50/60Hz). Physical characteristics of the amplifier shall be: • Height x Width x Depth of 3.5 x 17 x 16" / 89 x 432 x 406 mm • Net weight of not more than 21.6 lbs / 9.8 kg Model: The power amplifier shall be the BEHRINGER EUROCOM AX6220/AX6240.
-
Page 6: Dimensional Drawings
SIDE Copyright © 2013 MUSIC Group IP Ltd. All rights reserved. BEHRINGER, KLARK TEKNIK, MIDAS, BUGERA, and TURBOSOUND are part of the MUSIC Group (music-group.com). The information contained herein is correct at the time of printing. Technical specifications and appearance are subject to change without notice. Colors and specifications may vary from actual product. MUSIC Group IP Ltd. accepts no liability for any damages or loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein.
Need help?
Do you have a question about the EUROCOM AX6220 and is the answer not in the manual?
Questions and answers