Foxconn P43A Series User Manual page 24

USb Connectors : f_USb1/2/3/4
In addition to the four USB ports on the rear panel, this product
also provides four 10-pin USB connectors on its motherboard. By
connecting through USB cables with them, user can quickly expand
another eight USB ports on the front panel .
Serial ATA Connectors : SATA_1/2/3/4/5/6
The Serial ATA connector is used to connect with SATA Hard Disk
or CD devices which supporting this feature. The current Serial
ATA II interface allows up to 300MB/s data transfer rate.
SATA_1/2/3/4/5/6
Speaker Connector : SPeAKeR
The speaker connector is used to connect speaker of the
chassis.
fan Connectors : CPU_fAN, SYS_fAN, Nb_fAN
There are three fan headers on this motherboard. The fan speed
can be controlled and monitored in "PC Health Status" section of
the BIOS Setup. These fans can be automatically turned off after
the system enters S3, S4 and S5 sleeping states.
1
CPU_FAN
1
GND
TX+
TX-
GND
RX-
RX+
GND
1
GND GND
POWER POWER
SENSE SENSE
CONTROL CONTROL
SYS_FAN
5V_DUAL
1
GND
POWER
SENSE
CONTROL
NB_FAN
17
2
1
5V_DUAL
D-
D-
D+
D+
GND
GND
NC
EMPTY
9 10
F_USB 1/2/3/4
SPKJ 1
EMPTY
2
NC
3
SPKJ
4
SPEAKER