exit RAID bIoS
1. Take TryRAID5 as an example, select "5. exit" in main menu and press <Enter>.
The screen displays :
1. Create RAID Volume
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
RAID Volume :
None Defined.
Physical Devices:
ID
Device Model
0
ST3320418AS
1
ST3160815AS
2. Press <Y> to exit Intel
BIOS setup.
3. Shut down the computer, remove the Non-RAID disk, and we will continue for
Windows OS installation. If you do not remove irrelevant hard disk, Windows may
detect it during the installation, and you could be confused.
4. Remove any diskette from floppy drive.
5. Restart computer to start Windows installation.
Intel(R) Rapid Storage Technology - Option ROM - 10.0.0.1032
Copyright(C) 2003-10 Intel Corporation. All Rights Reserved.
[
[
DISK/VOLUME INFORMATION
Serial #
9VM8Y4D8
5RX4M04N
[↑↓]-Select
[ESC]-Exit
Matrix Storage Manager program. The system will enter
®
MAIN MENU
]
4. Recover Volume Options
5. Acceleration Options
6. Exit
]
Size
Type/Status(Vol ID)
298.0GB
Non-RAID Disk
149.0GB
Non-RAID Disk
[ENTER]-Select Menu
95