Table of Contents
Advertisement
Mounting Your rW 210
Your RW 210 GPS Navigator can be easily secured to either the windshield or the dash for
optimal viewing while driving. The mounting system consists of the following pieces:
•
Adjustable arm with suction cup
•
Navigator cradle
•
Dash disc with adhesive backing
Adjustable arm with
suction cup
to attach the Mount
1.
Select a location for the mount on the windshield or dashboard that does not
obstruct the driver's view or interfere with the operation of the vehicle.
2.
Clean and dry this area to remove any grease and dirt.
If mounting the RW Navigator on the dashboard, remove the protective
backing from the dash disc, exposing the adhesive. Adhere the disc to the
dashboard in the desired location.
3.
Place the suction cup on the desired location on the
windshield or dash disc; push the locking lever
towards the base of the mount. The mount should
stick to the surface.
If your mount does not stick, make sure the area is
clean and dry, then try again.
4
Dash disc with
adhesive backing
The adhesive is permanent.
Navigator Cradle
Advertisement
Table of Contents
