LCD TV MYRICA V30-1
Using PiP (Picture in Picture)
PiP
Swap
Audio Source
Using other functions
Reset
Aspect
Sleep
Changing the device settings
When you put the device into operation for the first time, you should carry out a
i
programme search as described in the chapter "Preparing for use
Changing the device settings with the buttons of the control panel
Use the buttons of the control panel to make the following device settings directly while the OSD
menu is switched off.
Selecting picture signal source
►
Press the SOURCE button.
The current signal input is displayed.
►
Press the SOURCE button repeatedly until the desired signal input appears.
Selecting TV programme
►
Press the PROG$! buttons to change over to the next or previous programme.
Adjusting the volume
►
Press the VOL-/+ buttons to adjust the volume.
Conducting the auto-adjustment of the LCD TV
In case of connection to the analogue output of a PC, the picture quality and position for your
system can also be optimally adjusted with the auto-adjustment function.
►
Press the AUTO button to optimally adjust the picture quality and position.
Opening and operating OSD menu
►
Press the MENU button to activate the OSD menu.
►
Press the MENU button repeatedly to scroll through the various menu pages.
►
Press the VOL+ button to open a submenu and activate a menu item.
►
Press the MENU button to return from a submenu to the main menu.
12
opens the PiP menu (Picture in Picture).
swaps the main picture with the PiP display.
chooses between the sound of the main picture and that of the PiP display.
resets brightness, contrast and colour temperature to the factory settings.
changes the size of the picture window. You can choose between full-screen,
non-linera, 4:3, 16:9 zoom and zoom.
Switch-off control (Off – 30 – 60 – 90 minutes)
A26361-K933-Z120-1-7619, edition 1