Advertisement
1. To use the adjustable attachment comb, slide
it over the trimmer blade and snap down into
position (Fig 4). At first, until you become familiar
with the adjustments, use the longest trim setting
(3/8"). (You can always go back and make your
beard a little shorter.) (Fig. 5)
2. Begin trimming your beard using smooth,
Fig. 4
even strokes. Start with your sideburns and work
downward toward your chin. (Never attempt to
trim against the natural growth of your beard,
because the hair will be cut too short.)
3. If you decide you want a closer trim, you can
now adjust the 5-position comb to a shorter
setting and go over your beard again until you
achieve the desired length.
TO TRIM YOUR MUSTAcHE
1. For best results, start with a clean, slightly
damp mustache.
2. Comb through your mustache in the direction
it grows.
3. Place the 5-position comb over the trimmer
blades and snap it into position. It is a good idea
to start with the longest trim setting adjustment.
(You can always go back and cut your mustache
more closely with a shorter setting.)
After your mustache has been trimmed to the
desired length, remove the 5-position trimming
attachment and, using the blades only, define the
outline of the bottom of your mustache.
Fig. 5
1. To remove the trimmer
head for cleaning, turn the
head counter-clockwise
until the arrow mark
aligned with the circle
mark, then lift the head
gently (Fig 6).
2. Only rinse the head under water (Fig 7).
For proper functioning of the unit, the handle
can not touch or be immersed in water.
3. After cleaning, make sure to shake dry the
head before replacing it
to the body.
4. To reassemble the head
onto the body, align the
arrow on the head with
ALWAYS TRIM YOUR MUSTAcHE
FROM THE TOP DOWN
TO cLEAN YOUR TRIMMER
Make sure trimmer is off.
Fig. 7
Fig. 6
Fig. 7
Fig. 8
Advertisement
