Conair i-stubble Instructions For Use

• Push the power button to switch the • It is always best to start cutting with a
i-stubble™ on. longer length first, then trim again if the
length is longer than desired.
usInG tHE trIMMEr wItHOut tHE
• Hold the i-stubble™ against the hair, the
COMb GuIDE
teeth of the comb guide should be pointing
• Using without the comb guide is ideal for
upwards and should be flat against the face.
detailing/shaping and general tidying of
• Move the trimmer upwards through the hair,
edges.
a little at a time, against the direction of hair
• To detach the comb guide, gently hold the
growth. The floating and contouring head will
trimmer in one hand and with your thumb and
follow the curves of your face to ensure both
index finger push up on each side of the
accuracy and comfort.
comb guide (fig. 1). Flip the comb guide to the
• The i-stubble™ will work most effectively
back of the unit and lock it into position by
when cutting through the hair at its own
clicking it securely onto the fastener on the
speed – never force through the hair. You may
back of the handle (fig. 2).
experience a little resistance when trimming
• Switch the i-stubble™ on by pushing the
the neck area, where hair is thicker and
''power on'' button. The LCD will illuminate
grows in many different directions. This is
and the blades will start to move.
completely normal.
• If you are looking for an ultra close finish,
• Just like shaving, extra time should be
you can use the trimmer without the comb
given when trimming under the neck area, as
guide. This will give you an extremely short
again this is where hairs grow in many
cut.
different directions.
IMPOrtant: please note when using the
• Never switch the trimmer off while in the hair.
trimmer without the comb guide, the cutting
length will be below 0.4mm. The length CLEanInG & MaIntEnanCE
setting shown on the LCD screen will no
• Regular cleaning will maintain the high
longer be relevant when the comb guide is
performance of your i-stubble™.
detached.
• Switch off and remove the power cord if
I-stubbLE™ tOP tIPs
connected.
• Detach the comb guide by gently lifting the
• Use on clean, dry hair.
front of the comb guide from both sides and
• If possible, when using for the first time, try
flipping it over to the back of the unit and
and grow your facial hair for a few days
locking it into position by clicking it securely
before cutting so you can trim down to a level
onto the fastener on the back of the handle.
that is best for you.
• Use the cleaning brush supplied to brush
• Set the cutting length as required.
away any hair and debris. Do not use a sharp
should be removed and properly disposed of
object to clean the trimmer blade.
when the unit is no longer operating. To
remove the battery block
• The blades can be removed to aid cleaning.
• To remove the blades hold the handle of the for disposal or recovery, follow these
instructions:
i-stubble™ with one hand, place your thumb
underneath the blades and push the blades 1. First, unplug the trimmer. Remove the
away from the handle.
screws on the back.
• Gently blow away any hair trapped beneath
2. Open the trimmer and remove the batteries
the blades.
using wire cutters.
• The blades can be rinsed under the tap.
3. To protect the environment, do not dispose
After rinsing the blades they may need to be
of your batteries with your ordinary household
oiled. See oiling instructions below. waste. For more details on recovery of
materials and waste treatment facilities,
• Ensure the blades are dry before reattach-
ing to the trimmer body. please contact the waste disposal services in
your region.
• Ensure you clean the blades after each use
and before storing away.
• It is highly recommended to oil the blades
from time to time with the oil provided. This
ensures optimum cutting performance. For
the first use you will need to use the oil
supplied with the product, unscrew the cap
and cut off the very end of the plastic tube
with a pair of scissors to release the oil. To oil
the blades ensure the unit is switched on.
Gently squeeze the oil tube and apply 2 drops
BATTERY REMOVAL INSTRUCTIONS
of oil onto the blades. Leave the unit on for a
further few seconds to allow the oil to
thoroughly spread the length of the blades.
5 TROLLEY A/B
Switch off the unit and remove any excess oil
by gently dabbing with a cloth.
nI-MH battErIEs
This trimmer has Nickel-Metal Hydride
BLADE HEAD 3 DECORATIVE COVER
4
batteries. In an effort to protect the environ-
ment, these batteries
LIMItED tHrEE yEar warranty
Conair will repair or replace (at our option) your unit
free of charge for 36 months from the date of pur-
chase if the appliance is defective in workmanship
or materials.
To obtain service under this warranty, return the defec-
tive product to the service centre listed below that is
nearest you, together with your purchase receipt and
$7.50 for postage and handling. In the absence of
a purchase receipt, the warranty period shall be 36
months from the date of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR
LIABILITIES, INCLUDING BUT NOT LIMITED TO THE
IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN
DURATION TO THE 36 MONTH DURATION OF THIS
WRITTEN, LIMITED WARRANTY.
IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY
RECYCLE / RECYCLÉE
CONTAINS NICKEL-METAL
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
HYDRIDE BATTERY. MUST BE
COLLECTED, RECYCLED OR
FOR BREACH OF THIS OR ANY OTHER WARRANTY,
DISPOSED OF PROPERLY. DO
EXPRESS OR IMPLIED, WHATSOEVER.
NOT DISPOSE OF IN
THE MUNICIPAL WASTE. This warranty gives you specific legal rights, and you
may also have other rights, which vary from province
to province.
SCREW COVER
1
SCREW
2
CAREFULLY CUT HERE
6 SCREW
WITH WIRE CUTTERS
TO REMOVE THE
BATTERY.
BATTERY
COB ASSEMBLY
7
The ultimate in stubble control
Have a Question?
please do not return this product
to the retailer.
Call us first!
sErvICE CEntrE:
Our customer service and product experts are
CONAIR CONSUMER PRODUCTS INC.
ready to answer aLL your questions.
100 Conair Parkway,
Please call our tOLL-frEE customer service
Woodbridge, Ontario
number at: 1-800-472-7606
L4H 0L2
or visit us online at
1-800-472-7606
www.conaircanada.ca
Consumer Call Centre E-mail :
Consumer_Canada@Conair.com
Model GMT900C
©2011 CONAIR CONSUMER PRODUCTS INC.
Instruction Booklet
www.conaircanada.ca
10CN118186 IB-10416
TM
TM/MD