Download Print this page

Conair INFNE158CSC Instruction Manual page 3

Advertisement

TO OPERATE PERSONAL GROOMER
1. To insert batteries, remove compartment cover.
Insert two AA alkaline batteries,
positive end up as indicated in
(Fig. 1). (Alkaline batteries will
insure the best performance and
longest life for your appliance.)
If you are not going to use the
unit for a long period of time,
or if batteries are dead, remove
batteries from the unit. This will increase the life of
your trimmer.
2. After inserting the batteries, close the battery
compartment.
3. Now your unit is ready to be used. *
4. Slide the On/Off switch upward to turn the
unit on.
*Do not use in the shower or submerse unit
in water. To clean, simply rinse trimmer blade
under faucet as illustrated under how "to clean
your trimmer" .
TURBO FEATURE
This product is equipped with a turbo boost
button. When activated, this will provide 15%
more cutting power. This is especially useful for
cutting through thicker hair.
To activate the turbo feature:
1. Turn the Power switch to the "on" position.
2. Press the Turbo button.
3. Continue to press the Turbo button for as long
as you need the extra power.
4. Release the Turbo button to return to
normal power.
Positive (+) Terminal
Fig. 1
NOW YOU'RE READY TO OPERATE YOUR
TRIMMER
1.) Your INFNE158CSC features
a 3 position pivoting head for
easy access when trimming
delicate and hard to reach
areas.
To use this feature:
2.) Pick up your INFNE158CSC
with the front of the trimmer
facing towards you, and simply push on the
pivoting head. There are 3 different positions,
so set it to the one most comfortable for you
(the unit comes prepackaged at the first setting,
but you can adust your groomer to either one of
the other two settings.) It will take some time
to get used to your own personal setting, so
try each one until you find a setting that works
for you. As you try each setting, you will notice
how comfortable this unit makes trimming your
nose/ear hairs or general grooming.
3. If you do not wish to use the pivoting head
feature, just leave the trimmer as it was when it
was removed from the packaging.
TO TRIM YOUR NOSE HAIR
Turn unit on. Gently insert trimmer head into
nostril. Gently move trimmer in
and out of the nostril using a
circular motion while rotating
the trimmer around the nostril
opening. Avoid inserting the
trimmer more than 1" to ensure
safe trimming. For added
convenience, when using the
nose/ear trimmer blade the
light on the unit will automatically turn on when
the trimmer is in use. NOTE: There is no light
when using beard/mustache trimmer.

Advertisement

loading