Page of 1

Philips HD4928 User Manual

Induction cooktop.
Hide thumbs
   

Advertisement

Register your product and get support at
1
www.philips.com/welcome
Overview
HD4928
HD4929
HD4928
HD4929
All registered and unregistered trademarks are
property of their respective owners.
© 2012 Koninklijke Philips Electronics N.V.
All rights reserved.
HD4928_4929_UM_India_V1.0_121019
1
Your induction cooker
4
Using the induction cooker (Fig.5)
Congratulations on your purchase and welcome to Philips! To fully
There are six preset cooking modes: Manual, Roti/Dosa, Gravy, Stir
benefit from the support that Philips offers, register your product at
Fry, Slow Cook and Pressure Cook.
www.philips.com/welcome.
1 Follow the steps in "Preparing for use".
2
What's in the box
2 Press the ON/OFF button (
the ON/OFF indicator lights up.
Induction cooker main unit
User manual
3 Press the desired cooking mode button, and the corresponding
indicator lights up.
Overview (Fig.1)
" The appliance starts working in the selected mode.
4 When the cooking is finished, press the ON/OFF button (
Cooking plate
Control Panel
a
d
to switch off the appliance.
Cooking zone
Air outlets
b
e
5 Unplug the appliance after the fan stops working.
Air inlet
Power cord
c
f
Note
Controls overview
During cooking, you can change the power level by pressing the
Increase (
Cook mode).
Manual Button
o
ON/OFF button
g
The time for induction cooking may be less than the time taken on
Roti/Dosa button
p
Pause button
h
a gas stove. Make sure that you keep all the ingredients you need
ready before you start cooking.
Gravy button
q
i
Increase button
Press the "Temp." button, and the induction cooker starts working
Residual heat indicator
r
Cooking temperature and
j
at the power of 800W.
power
Press the "Pause" button to stop the cooking process at any time.
Press the "Pause" button again to resume cooking.
Screen
s
Decrease button
k
When the "Residual heat" indicator lights up, do not touch the
Stir Fry button
t
Timer Button
l
cooking plate as the temperature is high.
Slow Cook button
u
Temp. Button
m
Pressure Cook button
n
Getting to know the cooking modes
3
Before first use
Refer to below tables for more details of different cooking modes.
Cooking
Default
Remove all packaging materials from the induction cooker.
mode
cooking
time
Preparing for use (Fig.2)
(minute)
1 Place the appliance on a dry, stable and level surface.
Manual
120
2 Make sure there is at least 10cm free space around the appliance
Roti/Dosa
60
to prevent overheating.
3 Always place the cookware on the cooking zone during cooking.
Gravy
45
4 Make sure you use cookware of the correct types and sizes (see
Slow Cook 180
the tables below).
Stir Fry
60
Choosing the proper cookware
Pressure
30
Cook
Use cookware that meets below requirements: (Fig.3)
Material
Cookware with a bottom made of iron or magnetic
Cooking
Usage
mode
stainless steel
Shape
Cookware with a flat bottom
Manual
This setting can be used for all types of cooking
especially if you want to control the time and
Size
Cookware with a bottom diameter of 12-20cm
temperature setting yourself. Press the manual
Weight
Cookware with a weight up to 8kg (including
button and use the (
contents)
increase or decrease the cooking temperature.
Roti/Dosa
This setting can be used to cook food on a
Do not use cookware described as below: (Fig.4)
flat induction type tawa. In case the tawa gets
overheated or is less heated, the temperature can be
Material
Cookware with a bottom made of non-iron metal,
adjusted using the (
heat resistant glass pots, ceramic, glass, aluminum or
copper.
Shape
Cookware with a concave or convex bottom
Size
Cookware with a bottom diameter of less than 12cm
or more than 20cm
Weight
Cookware with a weight over 8kg (including
contents)
a
b
www.philips.com/welcome
User manual
c
g
h
i
j
k
l
m
u
t
s
r
q
p
Gravy
This setting can be used to make a gravy dish from
the beginning to the end. The induction cooker
provides moderate heating for 5 minutes. You
can prepare the Tadka during that time. Then the
induction cooker switches to a higher power level
) to switch on the appliance, and
to roast vegetables, meat, and other ingredients for
13 minutes. After that it automatically switches to a
lower power level for another 27 minutes.
You may also switch to the manual mode for better
temperature control when making gravies.
)
Slow Cook
This setting is ideal for cooking at a low temperature
for a long time.
Stir Fry
This setting can be used to cook foods which
are continuously stirred like dry vegetables. The
temperature can be adjusted using the (
(
) button.
Pressure
This setting can be used for pressure cooking on
) or Decrease (
) button (not applicable in Slow
Cook
induction type pressure cookers. Pressure cooking
on an induction cooker may be faster than pressure
cooking on the gas stove. If you do not remove
the pressure cooker for more than 30 minutes, the
induction cooker will switch off automatically.
Using the timer (Fig.6)
You can use the Timer button to decide how much time you want
the appliance to work at different cooking modes.
1 Follow the steps in "Preparing for use".
2 Press the ON/OFF (
) button, the ON/OFF (
lights up.
3 Press the desired cooking mode button, and the corresponding
indicator lights up. The induction cooker starts working in the
Cooking
Adjustable
selected mode.
temperature range
cooking time
4 Press the Timer button and the timer indicator lights up.
range (minute)
5 Press the Increase (
) or Decrease (
the time by minute.
Keep warm - 240°C
1-180
6 When the time has elapsed, the induction cooker turns off
automatically.
Keep warm - 160°C
1-180
Keep warm - 160°C
1-180
Note
100°C
1-180
After you have selected the cooking time, wait for a few seconds
100 - 180°C
1-180
before the induction cooker automatically confirms it.
Keep warm - 220°C
1-45
After the timer is set, you can press the Timer button again to
cancel the timer.
5
Specifications
Models
HD4928
Voltage
220-240V/50-60Hz
) or (
) button to
Power
2100W
Dimension
340x270x65mm
Net weight
2.1kg
) or (
) button.
6
Cleaning (Fig.7)
Unplug the appliance 3 minutes after the cooking is finished and let
it cool down.
Clean the appliance with a damp cloth and, if necessary, with some
mild cleaning agent.
2
Preparing for use
f
e
d
n
7
Cleaning
o
Unplug the appliance 3 minutes after the
cooking is finished and let it cool down.
Note
Do not unplug the appliance before the fan stops working.
Never immerse the appliance in water nor rinse it under the tap.
Never use scouring pads, abrasive cleaning agents or aggressive
liquids such as petrol or acetone to clean the appliance.
Do not put vinegar on the cooking plate.
7
Maintenance
Improper use can lead to scratches on the cooking plate. To avoid
discoloring and scratches, use the appliance according to the
instructions in this user manual and always clean the appliance and
cookware properly after use.
) or
8
Storage
Do not place heavy objects on the cooking plate as it is
breakable.
Do not store the appliance in a hot place, for example near a
cooker.
If you are not going to use the appliance for a longer period of
time, store the appliance in a cool and dry place.
9
Environment
Do not throw away the appliance with the normal
household waste at the end of its life. Dispose of
responsibly. By doing this, you help to preserve the
environment.
10
Guarantee and service
) indicator
If you need service or information or if you have a problem,
please visit the Philips website at www.philips.com or contact the
Philips Consumer Care Centre in your country (you will find its
phone number in the worldwide guarantee leaflet). If there is no
Consumer Care Centre in your country, go to your local Philips
) button to adjust
dealer.
11
Troubleshooting
If your induction cooker does not function properly or if the
cooking quality is insufficient, consult the table below. If you are
unable to solve the problem, contact a Philips service centre or the
Consumer Care Centre in your country.
For a list of authorized Philips services centers, visit www.philips.
com or contact our consumer care at 1800 102 2929 (toll free) or
1860 180 1111 (standard call rates apply).
Problem
Solution
The On/Off button
There is a connection problem. Check if
(
) does not
the induction cooker is connected to the
respond.
mains and if the plug is inserted firmly
HD4929
into the wall socket
220-240V/50-60Hz
The appliance beeps
You may have put unsuitable cookware
continuously and then
on the cooking plate or you may have
2100W
stops working.
removed the cookware from the
160x280x65mm
cooking plate during cooking. Make sure
the cookware is made of steel, iron or
2.1kg
aluminum with stainless steel cladding
base and has a base diameter larger than
12cm.
You may have placed the cookware
outside of the cooking zone.
The cookware does
The bottom of the cookware may not be
not heat up to the
flat. Use cookware with a flat bottom. If
required temperature.
the problem still exists, take the appliance
to your Philips dealer or a service center
authorised by Philips.
3
Use below cookware
Use cookware with a flat bottom made of
iron or magnetic stainless steel, and with a
bottom diameter of 12-20cm.
5
4
Do not use below cookware
Using the induction cooker
> 20cm
6
Using the timer
<12cm
Do not use cookware with a concave or
convex bottom made of non-iron metal, heat
resistant glass pots, ceramic, glass, aluminum
and copper, or with a bottom diameter of
less than 12cm or more than 20cm.
Warranty and Service
The appliance does
You need to switch off the appliance and
not switch from
restart with another cooking mode.
For any information or problem, contact your local Philips dealer or
one preset mode to
authorized service center. For a list of authorized Philips service centers
another.
visit: www.philips.com or contact our consumer care at 1800 102 2929
(Toll free) or 1860 180 1111 (standard call rates apply). This apparatus is
The cooking
You may switch to the Manual mode for
temperature of the
better control of temperature. You may
covered under warranty against any defect due to defecitve material or
preset modes are too
also adjust the cooking temperature in
workmanship for ONE YEAR from the date of purchase. Should a defect
develop during the period of warranty, PHILIPS ELECTRONICS INDIA
high or too low.
these modes: Manual, Roti/Dosa, Stir Fry
and Pressure Cook.
LTD. undertakes to repair the apparatus FREE OF CHARGE through
the dealer from whom it has been purchased or at any of the Philips
When I press one of
The light is defective. Take the appliance
authorized Service Centers.
the cooking mode
to your Philips dealer or a service centre
buttons, the light of
authorised by Philips.
The warranty is not valid in case:
the selected mode
1. Apparatus is not used according to user manual.
does not go on.
2. Defects caused by improper or reckless use.
The cooking
In Gravy mode, the cooking temperature
3. Repairs done by persons other than Philips Authorized service center.
temperature
automatically changes. Switch to Manual
4. Modifications of any nature made in the apparatus.
automatically changes
mode for better control over the
5. Tampered serial number.
in some preset modes.
temperature.
6. Incomplete warranty card after purchase.
7. Product if used for commercial purpose (i.e. other than domestic use).
The fan works but
You have to press a cooking mode
8. Usage of parts not recommended by Philips or those made by other
the appliance has not
button after you have pressed the ON/
manufacturers.
started working.
OFF (
) button. If you do not press a
cooking mode button within one minute,
All consumables and parts susceptible to normal wear and tear are not
the induction cooker will switch off and
covered under warranty.
the fan continues to work for a while to
cool down the appliance.
Week/S.No.
Error code E1 or E2
The main sensor is in open circuit or
Date of purchase:
is displayed on the
short circuit state. Take the appliance to
Dealer's name:
screen.
your Philips dealer or a service center
Dealer's stamp:
authorised by Philips.
Customer's name and address:
Model No.:
Error code E3 or E4
The heat sink sensor is in open circuit or
Dealer's signature:
is displayed on the
short circuit state. Take the appliance to
screen.
your Philips dealer or a service center
authorised by Philips.
Error code E5 or E6
The voltage is either too high or too
is displayed on the
low. Wait for the voltage to stabilize and
screen.
try again.
Error code E7 is
The fan has malfunction. Take the
displayed on the
appliance to your Philips dealer or a
screen.
service center authorised by Philips.
Error code E8 is
The main sensor is not working. Take
displayed on the
the appliance to your Philips dealer or a
screen.
service center authorised by Philips.
Error code E9 is
The fuse has malfunction. Take the
displayed on the
appliance to your Philips dealer or a
screen.
service center authorised by Philips.

Advertisement

   Related Manuals for Philips HD4928

This manual also for:

Hd4929

Comments to this Manuals

Symbols: 0
Latest comments: