Get Started; Connect Power; Turn On; Select A Source - Philips AS170 User Manual

3 Get started

Always follow the instructions in this chapter in
sequence.

Connect power

Caution
•
Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the
bottom of the docking system.
•
Risk of electric shock! When you unplug the AC
adapter, always pull the plug from the socket. Never
pull the cord.
Note
•
The type plate is located on the bottom of the docking
system.
Connect the AC power adapter between
the DC IN socket at the back of the
•
docking system, and
• the power supply.

Turn on

Press POWER.
» The docking system switches to the last
selected source.
6 EN
Switch to standby mode
Press POWER again to switch the docking
system to standby mode.
» The clock (if set) is displayed.

Select a source

Press SOURCE/SET repeatedly to select a
source: FM preset, FM, Bluetooth, or AUX in.
Note
•
When an android-powered device is docked, the
system automatically switches to Bluetooth mode.

Set time

1
Press and hold SOURCE/SET for two
seconds.
» [24H] or [12H] begins to blink.
2
Press - TUNE/TIME or TUNE/TIME+ to
select [24H] or[12H] for 12 or 24 hour
format.
3
Press SOURCE/SET to confirm.
» The hour and minute digits begin to
blink.
4
Press - TUNE/TIME or TUNE/TIME+
repeatedly to set the hour.
ON Standby
POWER