Table of Contents
Advertisement
3 Get started
Caution
•
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in
this chapter in sequence.
If you contact Philips, you will be asked
for the model and serial number of
this apparatus. The model number and
serial number are on the bottom of the
apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Install batteries
Note
•
You can only use AC power as power supply. Batteries
(not supplied) are for backup purpose.
1
Open the battery compartment.
2
Insert 2 x AAA size batteries with correct
polarity (+/-) as indicated.
3
Close the battery compartment.
Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
•
Risk of decreased battery life! Never mix different
brands or types of batteries.
•
Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
Connect power
Caution
•
Risk of product damage! Ensure that the power voltage
corresponds to the voltage printed on the bottom of
the apparatus.
•
Risk of electric shock! When you unplug the AC power
cord, always pull the plug from the socket. Never pull
the cord.
•
Before connecting the AC power cord, ensure you have
completed all other connections.
•
To disconnect the set from the mains completely,
remove the mains plug from the wall socket.
•
Connect the AC power cord to the wall
outlet.
EN
7
Advertisement
Table of Contents
