Make A Video Call - Nokia 6288 User Manual

Network services options are Answer,
Reject, Hold or Unhold,
to conference, End call,
and the following:
Send DTMF — to send tone strings
Swap — to switch between the active
call and the call on hold
Transfer — to connect a call on hold to
an active call and disconnect yourself
Conference — to make a conference
call that allows up to five persons to
take part in a conference call
Private call — to discuss privately in a
conference call
Warning: Do not hold the
device near your ear when
the loudspeaker is in use,
because the volume may be
extremely loud.

■ Make a video call

When you make a video call, you send
a real-time video to the recipient of
the call. The video image captured by
the camera on the back of your phone
is shown to the video call recipient.
To be able to make a video call, you
must have a USIM card and be
connected in a WCDMA network.
For availability of and subscription to
video call services, contact your
network operator or service provider.
A video call can only be made between
two parties. The video call can be made
New call, Add
End all calls,
Copyright © 2006 Nokia. All rights reserved.
C a l l f u n c t i o n s
to a compatible phone or an ISDN
client. Video calls cannot be made
while another voice, video, or data call
is active.
1. To start a video call, enter the
phone number in the standby
mode, or select Contacts
contact.
2. Press and hold the call key, or
select Options >
Starting a video call may take a
while. Video call
animation is shown. If the call is
not successful (for example, video
calls are not supported by the
network, or the receiving device is
not compatible) you are asked if
you want to try a normal call or
send a message instead.
Tip: To increase or decrease
the volume during a call,
press the volume keys.
The video call is active when you
can see two video images and hear
the sound through the loudspeaker.
The call recipient may deny the
video sending, in which case you
may see a still image or a grey
background graphic. You will hear
the sound.
3. To end the call, press the end key.
and a
Video call.
and an outgoing
13