Hide thumbs Also See for 6288:

Advertisement

Quick Links

CMO Operations & Logistics
Training and Vendor Development
Multimedia Creation & Support
Service Manual 6288 RM-78/RM-268
Page
CONFIDENTIAL
SERVICE MANUAL
Level &2
RM-78
Copyright © 2006-2007 NOKIA Corporation. All rights reserved.

(24)
RM-268
Transceiver characteristics:
Band:
-RM-268: Tri-band phone for GSM 900/1800/1900MHz
-RM-78: Dual Mode Tri-band phone for GSM 900/1800/1900MHz;
WCDMA 2100
Camera: Back camera 2 Megapixel with 8x digital zoom
- RM-78 only: Frontside VGA camera
Display: Active matrix color display with 262.144 colors,
resolution 320 x 240 pixel
Bluetooth
IRDA
Visual radio
Connector: Pop-Port™ Connector
Transceiver with BP-6m Li-Ion battery pack
Talk time
up to 4.5h
Environmental characteristics:
Lead-free soldered
Approved .0
26.Feb.2007
Standby
Note
Depents on network
up to 11 days
parameters
MGR

Advertisement

Table of Contents
loading

Summary of Contents for Nokia 6288

  • Page 1 Camera: Back camera 2 Megapixel with 8x digital zoom - RM-78 only: Frontside VGA camera Display: Active matrix color display with 262.144 colors, resolution 320 x 240 pixel Bluetooth IRDA Visual radio Connector: Pop-Port™ Connector Transceiver with BP-6m Li-Ion battery pack Talk time Standby Note Depents on network up to 4.5h up to 11 days parameters Environmental characteristics: • Lead-free soldered Service Manual 6288 RM-78/RM-268 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
  • Page 2: Table Of Contents

    QUICK TROUBLE SHOOTER PART  QUICK TROUBLE SHOOTER PART 2 QUICK TROUBLE SHOOTER PART 3 QUICK TROUBLE SHOOTER PART 4 CHANGE HISTORY Status Version No. Date Comments Draft 8.Feb.2007 Initial draft Approved 26.Feb.2007 Approval Service Manual 6288 RM-78/RM-268 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
  • Page 3: Introduction

    Please keep in mind also that this documentation is continuously being updated and modified, so watch always out for the newest version. Warnings and Cautions Please refer to the phone’s user guide for instructions relating to operation, care and maintenance including important safety information. Note also the following: Warnings: CARE MUST BE TAKEN ON INSTALLATION IN VEHICLES FITTED WITH ELECTRONIC ENGINE MANAGEMENT SYSTEMS AND ANTI–SKID BRAKING SYSTEMS. UNDER CERTAIN FAULT CONDITIONS, EMITTED RF ENERGY CAN AFFECT THEIR OPERATION. IF NECESSARY, CONSULT THE VEHICLE DEALER/MANUFACTURER TO DETERMINE THE IMMUNITY OF VEHICLE ELECTRONIC SYSTEMS TO RF ENERGY.THE HANDPORTABLE TELEPHONE MUST NOT BE OPERATED IN AREAS LIKELY TO CONTAIN POTENTIALLY EXPLOSIVE ATMOSPHERES EG PETROL STATIONS (SERVICE STATIONS), BLASTING AREAS ETC. OPERATION OF ANY RADIO TRANSMITTING EQUIPMENT, INCLUDING CELLULAR TELEPHONES, MAY INTERFERE WITH THE FUNCTIONALITY OF INADEQUATELY PROTECTED MEDICAL DEVICES. CONSULT A PHYSICIAN OR THE MANUFACTURER OF THE MEDICAL DEVICE IF YOU HAVE ANY QUESTIONS. OTHER ELECTRONIC EQUIPMENT MAY ALSO BE SUBJECT TO INTERFERENCE. Cautions: 1. Servicing and alignment must be undertaken by qualified personnel only. 2. Ensure all work is carried out at an anti–static workstation and that an anti–static wrist strap is worn. 3. Use only approved components as specified in the parts list. 4. Ensure all components, modules screws and insulators are correctly re–fitted after servicing and alignment. 5. Ensure all cables and wires are repositioned correctly. Electrostatic discharge can easily damage the sensitive components of electronic products. Therefore every Service Supplier has to take care of all precautions, which are mentioned in the service level related “Service Partner Requirements”, available on NOKIA Online. Also see ESD Protection Requirements in this Service Manual. Service Manual 6288 RM-78/RM-268 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
  • Page 4: General Repair Information

    Always use your own equipment for testing where you are sure that it works. E.g. if the customer complains about charger function, please test the phone with your own charger to be sure if phone or charger causes the malfunction. • A SIM card is needed for all GoNoGo tests. • When doing the fault log entries, always note the Item code, which caused the malfunction. Also, fill in the appropri- ate part code from the assembly, if needed. • Please be aware that some malfunctions could be software related and solved by an update. • There are several documents available on NOL, which have to be followed: • • First, take care for the latest content pages of Service Bulletins, which are always available for each folder on NOKIA Online. This is also important to recognize, if existing documents have become invalid. • • The service level indicator at the bottom of each document tells the appropriate destination. Downloads > Support Library > Instructions General Service Bulletins Product related documents Spare Part Service Bulletins Service Tools Service Bulletins Common Software Service Bulletins etc,… Use General SB-217 as a reference or overview. Please also check NOKIA Online (NOL) for latest news and files on a regular basis. Service Manual 6288 RM-78/RM-268 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
  • Page 5: Pathfinder For Workshop Staff

    CMO Operations & Logistics Training and Vendor Development 26.Feb.2007 Multimedia Creation & Support CONFIDENTIAL PATHFINDER FOR WORKSHOP STAFF This is the NOL page (NOKIA Online) which is currently available in Europe, Middle East and Africa only! In addition to the information in this Service Manual, there are several instructions and information, which have to be followed. Main documentation database is NOKIA Online with the purpose of serving different multimedia content, like video clips or interactive tutorials.
  • Page 6: Exploded View

    Page (24) Approved .0 CMO Operations & Logistics Training and Vendor Development 26.Feb.2007 Multimedia Creation & Support CONFIDENTIAL EXPLODED VIEW See corresponding ITEM/CIRCUIT REF in the Spare Parts Service Bulletins on NOL. Service Manual 6288 RM-78/RM-268 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
  • Page 7: Spare Parts Overview

    Page (24) Approved .0 CMO Operations & Logistics Training and Vendor Development 26.Feb.2007 Multimedia Creation & Support CONFIDENTIAL SPARE PARTS OVERVIEW Service Manual 6288 RM-78/RM-268 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
  • Page 8: General Recycling Recommendation

    Page (24) Approved .0 CMO Operations & Logistics Training and Vendor Development 26.Feb.2007 Multimedia Creation & Support CONFIDENTIAL GENERAL RECYCLING RECOMMENDATION Service Manual 6288 RM-78/RM-268 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
  • Page 9: Nokia Online (Nol)

    (spare parts, SWAP units and service tools). This will ensure, that you are using up-to-date order codes only. Therefore Service Bulletins have to be checked from NOL on daily basis. Service Manual 6288 RM-78/RM-268 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
  • Page 10: Service Tools 0

    FLS-5 incl. ACF-8, Driver and User Guide Dongle and flash device incorporated into one package, developed specifically for POS use. ACF-8 Universal Power Supply is used to power FLS-5. Travel Charger AC-4 Small and lightweight charger with smaller charging plug to charge your phone battery fast. Internal Battery BP-6M Inserted under the back cover, this Li-Ion battery provides power in a lightweight package. Headset HS-23 Small and lightweight stereo headset with handsfree functionality, volume control, Push to talk support, and comfortable earpieces for listening to the FM radio or MP3 player in compatible phones. SS-5 Camera removal tool for VGA camera (Frontside) SS-45 Camera removal tool for 2 Megapixel camera (Backside) Service Manual 6288 RM-78/RM-268 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
  • Page 11 • Wera 867/1 5IP; 25mm (Torx 5 PLUS®) • Wera bit T6 PLUS® 867/4TX 6IP • Facom side cutter 416E • Facom T5 driver SP.14032 • Facom T6 driver SP.14033 • Facom slot screwdriver AEF. 2x35.E • Wetec tweezers 7abb SA-ESD • Wetec tweezers 22 SA-ESD • Wetec tweezers 13 SA-SMD ESD • Wetec tweezers PSF SA-ESD • Wetec ESD brush E1211 • Kaiser Fototechnik airbrush 6315 • Wetec dental tool DEM83266/0 • RS Components Scissors 323-5732 Service Manual 6288 RM-78/RM-268 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
  • Page 12: Sw-Update 2

    Page (24) Approved .0 CMO Operations & Logistics Training and Vendor Development 26.Feb.2007 Multimedia Creation & Support CONFIDENTIAL SW-UPDATE Flash Concept – (Point of Sales) To use FLS-5 Flash Dongle you have to follow the user guide inside the sales package. Please check always for the latest version of flash software, which is available on NOKIA Online. Service Manual 6288 RM-78/RM-268 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
  • Page 13: Disassembly Instruction (Upper Part) 3

    CMO Operations & Logistics Training and Vendor Development 26.Feb.2007 Multimedia Creation & Support CONFIDENTIAL DISASSEMBLY INSTRUCTION (UPPER PART) 1.) You need the following tools. 2.) Protect the window with a plastic film. 3.) Protect the camera window with a plastic film. 4.) Release the B-Cover. 5.) Remove the Battery Cover. Ensure that no battery is 6.) Shift out the unit. Release the clips of the top side first. inserted before continue. 7.) Slide along on both sides of the A-Cover to release all 8.) Lift up the A-Cover. clips. Service Manual 6288 RM-78/RM-268 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
  • Page 14 (24) Approved .0 CMO Operations & Logistics Training and Vendor Development 26.Feb.2007 Multimedia Creation & Support CONFIDENTIAL 10.) Protect the LCD with a plastic film. 9.) Protect the inner side window with a plastic film. Re- move the Keymat as shown. 12.) Lift the UI PWB together with the LCD Module. 11.) Shift together the unit. Lift up the glued UI PWB Assy carefully with the SRT-6. 13.) Carefully release the flex connector at one side first. 14.) Now release the other side of the flex connector. 16.) Release the connector of the LCD Module carefully 15.) Take away the UI PWB Assy. while fixing the flex foil. Remove the LCD Module now. Service Manual 6288 RM-78/RM-268 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
  • Page 15 Approved .0 CMO Operations & Logistics Training and Vendor Development 26.Feb.2007 Multimedia Creation & Support CONFIDENTIAL 17.) Separate the LCD Module from the Display Metal Shield. 18.) Release the Camera Guide Assy with the SRT-6. 19.) (VGA Camera only RM-78): Release the VGA Camera 20.) (VGA Camera only RM-78): For Assembly: Mind the cor- with the SS-51. Hold the Main Flex near the Camera Socket rect positioning of the VGA Camera. while removing the camera. 21.) Shift the unit into mid position. Release the connector 22.) Slot the flex connector through the C-Cover Assy care- of the Main Flex Assy. fully. 23.) Lift the glued Power Switch carefully. Service Manual 6288 RM-78/RM-268 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
  • Page 16: Disassembly Instruction (Lower Part) 6

    CMO Operations & Logistics Training and Vendor Development 26.Feb.2007 Multimedia Creation & Support CONFIDENTIAL DISASSEMBLY INSTRUCTION (LOWER PART) 2.) Ensure that no battery is inserted. 1.) Open the B-Cover by pressing it from the bottom side. 3.) Unscrew all Torx size 6 plus screws in the shown order. 4.) Once removed, the screws can’t be used again. Always For Assembly use the reverse order and a torque of 25 Ncm. use new screws for assembly. 5.) Release the clips of the D-Cover. 6.) Remove the D-Cover. 8) Mind the correct position while assembling. 7.) Remove the SMIA Camera with the SS-45. Service Manual 6288 RM-78/RM-268 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
  • Page 17 (24) Approved .0 CMO Operations & Logistics Training and Vendor Development 26.Feb.2007 Multimedia Creation & Support CONFIDENTIAL 9.) Lift up the Engine Module, but bear in mind that the flex 10.) Open the flex connector carefully. connector is still connected. 11.) Lever out the glued Keymat Assy. 12.) Ensure that no residue of the adhesive remains. Always use new adhesive when reassemble. 13.) Remove the DC Jack with the DC Plug. 14.) Release the IHF Label with the SRT-6. 15.) Remove the IHF Lid. 16.) Peel up the IHF Label completely. Always use a new one when reassembly. Ensure that no residues remain. Service Manual 6288 RM-78/RM-268 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
  • Page 18 Page (24) Approved .0 CMO Operations & Logistics Training and Vendor Development 26.Feb.2007 Multimedia Creation & Support CONFIDENTIAL 18.) Always remove the residues of the IHF Gasket. Use a 17.) Lever out the IHF Speaker. new one when reassemble. 19.) Place the dental tool in the gap between Microphone and Cover. Ease out the Microphone as shown. Once re- moved, it can’t be reused again. Service Manual 6288 RM-78/RM-268 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
  • Page 19: Main Domesheet Exchange Instructions 9

    MAIN DOMESHEET EXCHANGE INSTRUCTIONS 1. Carefully remove the MAIN DOMESHEET with SRT-6. Be 2. Remove the MAIN DOMESHEET slowly. careful not to damage surrounding components. 3. Take the new MAIN DOMESHEET from the carrier film. 4. There are outline markings which show the exact placement of the DOMESHEET. 5. Place the new MAIN DOMESHEET onto the ENGINE MODULE. 6. The holes of the dome sheet must also match exactly to those in the module. 7. Finally, fix the MAIN DOMESHEET all-over. Service Manual 6288 RM-78/RM-268 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
  • Page 20: Legend For Quick Trouble Shooter

    Page (24) Approved .0 CMO Operations & Logistics Training and Vendor Development 26.Feb.2007 Multimedia Creation & Support CONFIDENTIAL LEGEND FOR QUICK TROUBLE SHOOTER Service Manual 6288 RM-78/RM-268 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
  • Page 21: Quick Trouble Shooter Part

    Page (24) Approved .0 CMO Operations & Logistics Training and Vendor Development 26.Feb.2007 Multimedia Creation & Support CONFIDENTIAL QUICK TROUBLE SHOOTER PART  Service Manual 6288 RM-78/RM-268 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
  • Page 22: Quick Trouble Shooter Part 2

    Page (24) Approved .0 CMO Operations & Logistics Training and Vendor Development 26.Feb.2007 Multimedia Creation & Support CONFIDENTIAL QUICK TROUBLE SHOOTER PART 2 Service Manual 6288 RM-78/RM-268 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
  • Page 23: Quick Trouble Shooter Part

    Page (24) Approved .0 CMO Operations & Logistics Training and Vendor Development 26.Feb.2007 Multimedia Creation & Support CONFIDENTIAL QUICK TROUBLE SHOOTER PART 3 Service Manual 6288 RM-78/RM-268 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
  • Page 24 Page (24) Approved .0 CMO Operations & Logistics Training and Vendor Development 26.Feb.2007 Multimedia Creation & Support CONFIDENTIAL QUICK TROUBLE SHOOTER PART 4 Service Manual 6288 RM-78/RM-268 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.

Table of Contents