Keypad Lock (Keyguard) - Nokia 6288 User Manual

Y o u r p h o n e
/ A packet data connection is
established.
/ The packet data connection is
suspended (on hold), for
example, if there is an
incoming or outgoing call
during a packet data dial-up
connection.
When the infrared
connection is activated, the
indicator is shown
continuously.
A Bluetooth connection is
active.
If you have two phone lines,
the second phone line is
selected.
All incoming calls are
diverted to another number.
The loudspeaker is activated,
or the music stand is
connected to the phone.
Calls are limited to a closed
user group.
The timed profile is selected.
, , , or
A headset, hands-free,
loopset, or music stand
enhancement is connected to
the phone.
10 Copyright © 2006 Nokia. All rights reserved.
or A push to talk connection is
active or suspended.
■ Keypad lock
(keyguard)
To prevent the keys from being
accidentally pressed, select Menu, and
press * within 3.5 seconds to lock the
keypad; or close the slide, and select
Lock.
To unlock the keypad, open the slide,
or select Unlock > OK. If the slide is
open, select Unlock, and press * within
1.5 seconds. If the Security keyguard
set On, select Unlock, press *, and enter
the security code.
To answer a call when the keyguard is
on, press the call key. When you end or
reject the call, the keypad
automatically locks.
For Automatic keyguard
keyguard, see "Phone,"
When the keyguard is on, calls may be
possible to the official emergency
number programmed into your device.
is
and Security
p. 52.