Bios Security Features - Foxconn G43MX Series User Manual

bIoS Security features

Supervisor Password : Installed
User Password
Change Supervisor Password
User Access Level
Change User Password
Clear User Password
Password Check
Boot Sector Virus Protection
↑↓←→:Move Enter:Select
► Change Supervisor Password
This item is used to install or change supervisor password.
After you input Supervisor password, it then will ask you to
input user password optionally.
If you have installed the supervisor password, the following
items will appear:
► User Access Level
This item is used to set user access level.
The available settings are:
[No Access]: Prevent user access to the setup utility.
[View Only]: Allow access to the setup utility but the fields can not be changed.
[Limited]: Allow only limited fields to be changed, such as date and time.
[Full Access]: Allow any field to be changed except the
supervisor password.
► Change User Password
This item is used to install or change user password.
► Clear User Password
This item will be displayed only when a User Password was
set before. It is used to clear the user password.
► Password Check
When it is set to [Setup], a password is required to enter the BIOS setup; select [Always], a
password is required not only to enter BIOS setup, but also on each boot of your PC.
► Boot Sector Virus Protection
This item is used to enable / disable boot sector virus protection.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
BIOS Security Features
: Installed
+/-/:Value
F9:Optimized Defaults
[Press Enter]
Install or change the
[Full Access] password
[Press Enter]
[Press Enter]
[Setup]
[Disabled]
F10:Save ESC:Exit
42
Help Item
F1:General Help
Enter New Password :
Enter New Password :