Foxconn G43MX Series User Manual page 14

This chapter introduces the hardware installation process, including
the installation of the CPU, memory, power supply, slots, pin headers
and the mounting of jumpers. Caution should be exercised during
the installation of these modules. Please refer to the motherboard
layout prior to any installation and read the contents in this chapter
carefully.
This chapter includes the following information :
■
■
■
■
■
This motherboard support CPUs with a power rating no more than 105W, which
include Intel ® Core
Core, Celeron ® Dual-Core, Celeron ® and 45nm CPUs. For further information,
please refer to website below for CPU Support List. We cannot guarantee that
your system can operate normally if you use a CPU not included in the CPU
Support List.
Please visit this website for more supporting information about CPU, Memory and
VGA for your motherboard :
http://www.foxconnchannel.com/product/Motherboards/compatibility.aspx
Install the CPU and CPU Cooler
Install the Memory
Install an Expansion Card
Install other Internal Connectors
Jumpers
2 Quad, Core
TM TM
2 Extreme, Core
TM
2 Duo, Pentium ® Dual-