Fox Intelligent Stepping - Foxconn A74ML 3.0 Series User Manual

Power-On Self-Test (POST). The LED is located at the front panel, and it displays POST state
by different long-short blinking intervals. You can always leave this state enabled.
Normal
No CPU Fan
No Display
No Memory
Post Error Message
► Smart Boot Menu
When PC starts, it will ask you to press [Del] key to enter setup or press [Esc] key to enter
smart boot menu. If [Disabled] is selected, then pressing [Esc] has no function.
► Current CPU Speed
This item displays the current CPU speed.
► Current DRAM Clock
This item displays the current DRAM clock, in dual DRAM controller

Fox Intelligent Stepping

CPU Clock
PCI Express Clock
CPU Multiplier Adjust
Spread Spectrum
↑↓←→:Move Enter:Select
► CPU Clock
This option is used to adjust the CPU clock.
► PCI Express Clock
This option is used to adjust the speed of PCI Express slot. It may enhance the graphics card
speed.
► CPU Multiplier Adjust (Optional only if CPU supports)
This option is used to adjust the CPU Clock Ratio. Multiply CPU clock with this ratio, you can
get the CPU speed. Increase this ratio may overclock your CPU. This option will be displayed
only if your CPU is supporting this feature.
System Status
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
Fox Intelligent Stepping
+/-/:Value
F9:Optimized Defaults
Power LED Status
On
Blinking once (blinking 0.5 sec., off 0.5 sec.)
Blinking once (blinking 2 sec., off 2 sec.)
Blinking twice
Blinking thrice
[200]
[200]
[100]
[Auto]
[Enabled]
F10:Save ESC:Exit
26
Help Item
F1:General Help