Table of Contents
Advertisement
6. Insert a diskette, click "OK" to continue.
7. You can input a volume label for this diskette,
click on "Start" to format.
8. Click on "OK" to go through this warning
message.
9. Format finished. Click "OK", then click "Close"
to continue copying of RAID driver into this
diskette.
10. Check if the first diskette contains the
driver files.
11. Go to CD:\Driver\NVIDIA\MCP78\
Chipset\WinXP\32bit\IDe\WinXP\
sataraid\floppy\Disk2, click on
RaidTool icon to start the second RAID
driver diskette creation. Repeat the
steps from step 4 to step 10.
72
Advertisement
Table of Contents
