Firmware Update And Ip Configuration; Firmware Update - Asus ASMB4-IKVM User Manual

2.3

Firmware update and IP configuration

You need to update the ASMB4-iKVM/ASMB4-SOL PLUS firmware and configure
IP source before you start using the ASMB4-iKVM/ASMB4-SOL PLUS board.
2.3.1

Firmware update

To update the firmware:
1. Insert the support CD into the optical drive.
2. Restart the remote server, then press <Del> during POST to enter the BIOS
setup.
3. Go to Boot menu and set the Boot Device Priority item to [CD-ROM].
4. When finished, press <F10> to save your changes and exit the BIOS setup.
On reboot, the main menu appears. Select ASMB4-iKVM (or ASMB4-SOL
5.
PLUS) Firmware Update for Preserve Configuration, and press <Enter> to
enter the sub-menu.
FreeDOS command prompt
Configure BMC IP Source Static IP for LAN1
Configure BMC IP Source DHCP for LAN1
Configure BMC IP Source Static IP for LAN3
Configure BMC IP Source DHCP for LAN3
ASMB4-iKVM Firmware Update for Preserve Configuration
ASMB4-iKVM Firmware Update for Clear Configuration
6. A confirmation message appears, asking whether you want to update the
firmware or not. Select <Yes> to update.
WARNING !!!
UPDATE ASMB4-iKVM FIRMWARE NOW !
DO YOU WANT TO CONTINUE ?
The firmware updating process starts.
2-4
ASUS Server Z8PE-D12X MB
No Yes
Chapter 2: Installation