Table of Contents
Advertisement
2.3
Firmware update and IP configuration
You need to update the ASMB9-iKVM firmware and configure IP source before you start
using the ASMB9-iKVM board.
2.3.1
Firmware update
To update the firmware:
1.
Insert the support CD into the optical drive.
2.
Restart the remote server then press <Del> during POST to enter the BIOS setup.
3.
Go to the Boot menu and set the Boot Device Priority item to [CD-ROM].
4.
When finished, press <F10> to save your changes and exit the BIOS setup.
5.
On reboot, select ASMB9-iKVM Firmware Update for Clear Configuration from the
main menu and press <Enter> to enter the sub-menu.
FreeDOS command prompt
Configure BMC IP Source Static IP for Shared LAN
Configure BMC IP Source DHCP IP for Shared LAN
Configure BMC IP Source Static IP for DM_LAN1
Configure BMC IP Source DHCP IP for DM_LAN1
ASMB9 Firnware Updated for Preserve Configuration (SDR, LAN, Username)
ASMB9 Firnware Updated for Clear Configuration (SDR, LAN, Username)
6.
From the confirmation message, select <Yes> to update the firmware.
WARNING !!!
UPDATE ASMB9 FIRMWARE NOW !
DO YOU WANT TO CONTINUE ?
7.
Wait for the firmware updating process to finish.
You may update the firmware from the web-based user interface. Refer to the 3.10
Maintenance section for more information.
ASUS ASMB9-iKVM
ASUS Server Z11PP-D24 Series System
No
Yes
2-3
Advertisement
Table of Contents
