Configure Bmc Ip Source Dhcp - Asus ASMB4-IKVM User Manual

Server management board
Table of Contents

Advertisement

2.3.3

Configure BMC IP source DHCP

1.
Repeat the step 1-4 in the previous sub-section.
On reboot, the main menu appears.Select Configure BMC IP Source DHCP for
2.
LAN1 (or LAN3), and press <Enter> to enter the sub-menu.
FreeDOS command prompt
Configure BMC IP Source Static IP for LAN1
Configure BMC IP Source DHCP for LAN1
Configure BMC IP Source Static IP for for LAN3
Configure BMC IP Source DHCP for for LAN3
ASMB4-iKVM Firmware Update for Preserve Configuration
ASMB4-iKVM Firmware Update for Clear Configuration
3.
A confirmation message appears, asking if you want to configure the BMC IP
source DHCP now. Select <Yes> to continue.
WARNING !!!
CONFIGURE BMC IP Source DHCP NOW !
DO YOU WANT TO CONTINUE ?
4.
When the configuration is completed, the below screen appears.
Detect Motherboard
Detect KCS Interface
New BMC IP Source : DHCP
Press any key to continue ...
5.
Then you can get IP from DHCP server.
ASUS ASMB4-iKVM/ASMB4-SOL PLUS
ASUS Server Z8PE-D12X MB
-> (Z8PE-D12X)
No
Yes
2-7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Asmb4-sol plus

Table of Contents