Table of Contents
Advertisement
Folding up backrest
Before folding up the backrest, remove the lug‐
gage compartment roller cover, refer to
page 140, and, if necessary, slide the 2nd row
seats slightly forward.
1.
Pull the lever, refer to arrow. The backrest is
unlocked.
2.
Fold up and engage the backrest.
Ensure that the lock is securely en‐
gaged
Make sure that the catch engages securely.
If it is not properly engaged, transported
cargo could enter the passenger compart‐
ment during braking or evasive maneuvers
and endanger the vehicle occupants.◀
3.
Push the head restraints into the top posi‐
tion.
Folding backrest down
1.
Push the head restraints down, refer to
page 56.
2.
Pull the lever, refer to arrows. The backrests
are released.
3.
Fold the backrest down.
Online Edition for Part no. 01 40 2 901 869 - 03 12 500
Adjusting
Seat heating
Front
The temperature setting progresses one step
through its control sequence each time you
press the button. The maximum temperature is
reached when three LEDs are lit.
If the trip is continued within approx. 15 minutes,
the seat heating is activated automatically with
the temperature set last.
To switch off: press and hold the button.
The temperature is reduced, if need be, down to
no heat in order to reduce the load on the bat‐
tery. The LEDs remain lit.
Rear
Operation similar to front seat heating, without
temperature distribution.
Controls
51
Advertisement
Table of Contents
