Programmed Auto Exposure Mode (Flexible Program, Program Chart) - Nikon F100 Instruction Manual

Hide thumbs Also See for F100:
Table of Contents

Advertisement

NOTE: Flexible Program
In Programmed Auto, by rotating the
Main-Command Dial you can change
the combination of shutter speed
and aperture while maintaining
correct exposure. With this function,
you can shoot in Programmed Auto
as though you were shooting in
Shutter-Priority Auto or Aperture-Priority Auto. * appears in the LCD
panel when the Flexible Program is used. To cancel the Flexible
Program, rotate the Main-Command Dial until * disappears, change the
exposure mode, turn the power switch off, or perform Two-Button Reset
(page 76).
Program chart
The program chart shows exposure control in Programmed Auto exposure
mode.
——
With ISO 100, lens with maximum aperture of f/1.4 and
minimum aperture of f/16 (e.g. AF 50mm f/1.4D).
Aperture
• There are limitations for minimum and maximum EV depending on the film
speed.
• In Matrix Metering, any EV above 16
ISO 100 film.
EV range: EV 0-21
Shutter speed
1
/
3
is controlled to EV 16
1
/
when using
3
47

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents