Custom Setting Menu - Nikon F100 Instruction Manual

Custom Setting Menu

Automatic film rewind at the end of film
1
roll
Change of steps of the exposure values
(shutter speed, aperture, exposure
2
compensation or compensated EV value in
Bracketing)
Bracketing order
3
Autofocus activated when shutter release
4
button lightly pressed
Warning indications with non-DX-coded
5
film
Focus area selection changed to
6
continuously in the same direction
Auto Exposure Lock when shutter release
7
button is lightly pressed
Film advance with closing the camera
8
back (when power switch is on)
Dynamic AF Mode with Closest Subject
9
Priority in Single Servo AF
Dynamic AF Mode with Closest Subject
10
Priority in Continuous Servo AF
Auto Exposure/Flash Exposure Bracketing
options
11
Switching Command Dial operations
12
110
Function
Options
0: Disabled (initial setting)
1: Enabled
3: 1/3 steps (initial setting)
2: 1/2 steps
1: 1 steps
0: Initial setting (See pages 58-59.)
1: From negative value to positive value
0: Enabled (initial setting)
1: Disabled
0: After film is advanced to the first frame
(initial setting)
1: When the power switch is on
0: Disabled (initial setting)
1: Enabled
0: Disabled (initial setting)
1: Enabled
0: Disabled (initial setting)
1: Enabled
0: Enabled (initial setting)
1: Disabled
0: Disabled (initial setting)
1: Enabled
AS: Simultaneous activation of Auto
Exposure/Flash Exposure Bracketing
(initial setting)
AE: Only Auto Exposure Bracketing
activated
Sb: Only Flash Exposure Bracketing
activated
0: Disabled (initial setting)
1: Enabled