24
en | Programming
7.
NOTICE!
Configuration of the display is possible only in display mode FL,RO,BE (floor, room, bed).
If the NurseCall system is in display mode NUMBER, there is no need of further programming.
4.4.5
Selection "DISPLAY NORSK"
NOTICE!
The display mode NUMBER ZZZZ (alphanumeric display) is not compatible with the Display
Norsk. Make sure to choose another display mode when connecting a Display Norsk to the
Relay Plus Unit. See the NurseCall Main Unit user manual for more information.
¬ RS-232 Output
DISPLAY NORSK
1.
¬ DISPLAY NORSK
Rota.of Alarms:YES ¡
2.
3.
DISPLAY
FL: 2 +RO: 3 +BE:1
4.
NOTICE!
Configuration of the display is possible only in display mode FL,RO,BE (floor, room, bed).
If the NurseCall system is in display mode NUMBER, there is no need of further programming.
F.01U.252.722 | V1 | 2011.12
c.
Choose 0 to 9 characters for the criterion, followed by 0 to 9 spaces.
Default values are 2 characters + 1 space.
Repeat the operation for
a.
the floor (0 to 3 characters and 0 to 9 spaces), by default 2 characters and 1 space
b.
the room (0 to 3 characters and 0 to 9 spaces), by default 2 characters and 1 space
c.
the bed (0 or 1 character), by default 1 character.
if you have selected DISPLAY NORSK, press
Set the rotational display of alarms.
Select YES or NO with
Configure the display of the 6 identification positions. The outcome is visible at the top.
:
ffrrrb
–
Select a field with
–
Confirm with
.
–
Choose 0 to 9 characters for the criterion, followed by 0 to 9 spaces.
Default values are 2 characters and 1 space.
Repeat the operation for
–
the floor (0 to 3 characters), by default 2 characters
–
the room (0 to 3 characters), by default 3 characters
–
the bed (0 or 1 character), by default 1 character.
to confirm.
¢
and
. Default value is YES. Confirm with
and
, change a value with
User Manual
NurseCall Relay Unit
.
and
.
Bosch Security Systems