Tone Settings; Display Brightness - Nokia 6610i User Manual

Screen saver
The digital clock screen saver is used
for power saving in standby mode. It
is activated when none of the
phone's functions have been used
for a certain time. Press any key to
deactivate the screen saver. The
screen saver is also deactivated
when the phone is out of the
network coverage area.
Press Menu, and select Settings,
Display settings and
timeout. Select the timeout after
which the digital clock display will
be activated from 5 seconds to 60
minutes.
Note that the screen saver overrides
all the graphics and texts on the
display in standby mode.

Display brightness

You can change the display
brightness level used on the phone
display.
Press Menu, and select Settings,
Display settings and
brightness. Scroll with
to decrease and increase the
brightness level, and press
accept it.

Tone settings

Press Menu, and select
then Tone settings. You can find the
same settings in the
see "Profiles (Menu 4)"
Note that the settings you make, will
Screen saver
Display
and
OK to
Settings and
Profiles menu,
on page 39.
Copyright © 2004 Nokia. All rights reserved.
M e n u f u n c t i o n s
change the settings in the active
profile.
Select Incoming call alert
how the phone notifies you of an
incoming voice call. The options are
Ringing, Ascending,
once and Off.
Select Ringing tone
voice calls. To select ringing tones
that have been saved in the Gallery,
select Open gallery
tone list.
Select Ringing volume
Vibrating alert for incoming voice
calls and messages. The vibrating
alert does not work when the phone
is connected to a charger, a desktop
stand, or a car kit.
Tip: If you receive a ringing
tone via infrared connection
or by downloading, you can
save the ringing tone in the
Gallery.
Select Message alert tone
alert tone for the incoming
messages, Keypad
Warning tones to set the phone to
sound tones, for example, when the
battery is running out of power.
Select Alert for to set the phone to
ring only upon calls from phone
numbers that belong to a selected
caller group. Scroll to the caller
group you want or
Mark.
to choose
Ring once, Beep
for incoming
from the ringing
and
to set the
tones, or
All calls and press
45