Modes And Display Screens; Using The Stopwatch - Casio 3073 Operation Manual

Operation Guide 3073

Modes and Display Screens

Timekeeping Mode
Hour, minute, second
Personal Data Mode
Alarm Mode
World Time Mode

Using the Stopwatch

This section provides information about the stopwatch, and some basic
information about the heart rate monitor.
Using the Stopwatch
• • • • • Measuring Unit: 1/100 second
• • • • • Measuring Capacity: 99:59'59.99"
• • • • • Lap/Split Count Range: 999
• • • • • Cumulative Exercise Time: 9,999 hour, 59 minutes
• • • • • Cumulative Consumed Energy: 239,005 kcal (999,999 kJ)
To use the stopwatch
Before measuring heart rate and exercise intensity, be sure to first
configure your personal information and put on the chest strap.
To enter the Stopwatch Mode, press the D button
once while in the Timekeeping Mode.
I Elapsed Time Measurement
• Stop
• Reset (Data to memory)
Start
Whenever you press the B button to reset
the stopwatch to all zeros, the data from the
last measurement operation are stored in
memory.
• • • • • Cumulative Time Measurement
Pressing the E button to restart the
stopwatch without resetting it to all zeros
• Start
resumes elapsed time measurement from
where it was last stopped.
Day of the week
Month, day, year
Stopwatch Mode
Data Recall Mode
Timer Mode
Stop Reset
I Recording Lap/Split Times
• Stop
• Reset (Data to memory)
Start
The watch will exit the lap/split screen
automatically after about eight seconds.
• Start
• Lap/Split
Stopwatch Mode Screens
Reset Screen
Number of remaining laps
Lap time
(Hours, Minutes,
Seconds,
1/100 second)
Split time
(Hours, Minutes, Seconds, 1/100 second)
Current time
To switch between lap time and split time
Each press of the A button switches the display between lap time and
split time.
Number of laps
Lap time
Split time
To display the heart rate screen
Hold down the A button for about two seconds to switch from the lap
time or split time screen to the heart rate screen.
• Pressing the A button while the heart rate screen is displayed will
switch between lap time and split time screen.
Lap/split time
Number of laps
(2 seconds)
Split/lap time
To switch between graph types
While the heart rate screen is on the display, hold down the F button as
you press the A button. This will cause the graph at the top of the
display to switch between the heart rate graph and exercise intensity
graph.
• The graph you select here will also appear in the Data Recall Mode.
Heart rate graph Exercise intensity graph
• The data shown on the heart rate graph and exercise intensity graph
represents readings at one-minute intervals.
Lap/split Lap/split
Stop Reset
Elapsed Time Screen
Number of laps
Number of laps
Split time
Lap time
Intensity
Heart rate
Graphic area
Split/lap time
3