Usb 2.0 Connectors; Usb 3.0 Connector - Asus A88X-PLUS User Manual

7. USB 2.0 connectors (10-1 pin USB56, USB78, USB910)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specification that supports up to
480Mbps connection speed.
A88X-PLUS
A88X-PLUS USB2.0 connectors
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
The USB 2.0 module is purchased separately.
8. USB 3.0 connector (20-1 pin USB3_34)
These connectors allow you to connect a USB 3.0 module for additional USB 3.0 front
or rear panel ports. With an installed USB 3.0 module, you can enjoy all the benefits of
USB 3.0 including faster data transfer speeds of up to 5Gbps, faster charging time for
USB-chargeable devices, optimized power efficiency and backward compatibility with
USB 2.0.
A88X-PLUS
A88X-PLUS USB3.0 Front panel connector
You can connect the ASUS front panel USB 3.0 bracket to this connector to obtain the front
panel USB 3.0 solution.
ASUS A88X-PLUS
USB910 USB78
PIN 1 PIN 1 PIN 1
USB3_34
GND IntA_P2_D+
IntA_P1_D+ IntA_P2_D-
IntA_P1_D- GND
GND IntA_P2_SSTX+
IntA_P1_SSTX+ IntA_P2_SSTX-
GND GND
IntA_P1_SSTX- IntA_P2_SSRX+
IntA_P1_SSRX+ IntA_P2_SSRX-
IntA_P1_SSRX- USB3+5V
USB3+5V
PIN 1
USB56
1-19