GE 2-9191 User Manual page 8

NOTE: If the low battery icon
the display, you need to replace the batteries. It is
important that you replace the batteries as soon as
possible in order to maintain Caller ID operation.
During the replacing of batteries, a backup circuit
in the unit will retain your stored information for
up to 60 seconds. Write down any stored
information you do not want erased.
IMPORTANT: If you're not going to use the
telephone for more than 30 days, remove the
batteries because they can leak and damage the
unit.
S
ETTING
M
ENU
You should not plug the telephone into the wall line jack
while setting up the Caller ID menu. An incoming call may
invalidate the change if it was not yet saved. The phone
must display xx CALLS before you can enter the setup
menu.
1. Press and hold the REVIEW up button then press and
hold the REVIEW down button. Continue to hold both
buttons for 3 seconds. SETUP MENU ^ v appears.
2. At this point you can press either REVIEW up or down
button to scroll among the 6 menu screens, which are:
• SETUP MENU ^ v
• LOCAL AREA CODE (default - - -)
• CID LANGUAGE (default English)
• LCD CONTRAST (default 3)
• T/P DIAL MODE (default tone)
• EXIT SETUP
3. You have 10 seconds following any key press before
the phone will automatically
return to the CALLS
summary screen.
8
U
P THE
LOW
C
ALLER
SETUP MENU
delete
appears in
ID
CALLER ID PHONE
dial
review