Table of Contents
Advertisement
Installation and Operating Manual | VIDOS Monitor Wall
Introduction
About this manual
This section is intended for persons who will set up the VIDOS Monitor Wall
program. The manual describes how to set up and start using VIDOS Monitor
Wall.
VIDOS Monitor Wall is an add-on program for the VIDOS video management
system. It is installed on a separate PC integrated into the VIDOS system. Within
the VIDOS system, VIDOS Monitor Wall is treated as a hardware decoder,
although it allows the video data to be played back on digital monitors connected
to this PC.
This document assumes that you are familiar with the VIDOS system and with
the VIDOS and Configuration Manager programs.
Conventions in this manual
The following symbols and notations highlight important situations and
information:
Warning!
Security instructions where non-compliance can result in loss of data are
marked with this symbol.
Note
This symbol indicates special features and provides tips and information
for easier, more convenient use of the software.
Terms that you can find in the program, e.g. menu options or commands, are
written in bold.
References to other documents or other points in this document are written in
SMALL CAPITALS
If you have any questions about the programs from the VIDOS Pro Suite, you
can find further information on the Internet at:
www.vidos.net
Bosch Security Systems | 2005-09 | V1.0
.
EN | 3
1
Introduction
Advertisement
Table of Contents
