Installation and Operating Manual | VIDOS Monitor Wall
Installation and Setup
This section is aimed at the administrator of a VIDOS system. It describes how
to set up VIDOS Monitor Wall.
Once started, VIDOS finds the program during a network scan like any other
hardware receiver and it can then be integrated into the system.
The design of the monitor layout and the camera connections are controlled by
VIDOS.
You can give users the opportunity to operate VIDOS Monitor Wall, e.g.
establish connections to the monitor windows, by giving them access to a
VIDOS workstation with a mouse and PC keyboard or VIDOS IntuiKey. You can
use rights management to assign individual users different options for operation.
Details can be found in the separate documentation for V
I
K
.
NTUI
EY
Installation
The VIDOS Monitor Wall is typically installed on a PC on which none of the other
programs from the VIDOS Pro Suite are installed. the Configuration Manager
program is also automatically installed along with VIDOS Monitor Wall. The
program CD comes complete with installation instructions (Q
G
).
UIDE
After installation, you will find the following icon on your desktop:
1. Click on this icon to start VIDOS Monitor Wall.
Note
You can also open the program from the VIDOS folder in the Windows
Start menu.
Bosch Security Systems | 2005-09 | V1.0
2
and V
IDOS
IDOS
I
UICK
NSTALLATION
Installation and Setup
EN | 7