Bosch VIDOS Monitor Wall Installation And Operating Manual page 15

Installation and Operating Manual | VIDOS Monitor Wall
Note
You can use VIDOS to control more than one VIDOS Monitor Wall.
7. Right click on the icon for the desired VIDOS Monitor Wall and select
Properties.
You will see the General tab in the Properties dialog box.
8. Give the VIDOS Monitor Wall a descriptive name and close the dialog box.
9. Repeat steps 2 to 8 for each installed VIDOS Monitor Wall.
Every VIDOS Monitor Wall installed on a network PC is now integrated into the
VIDOS system.
Setting up the monitor window layout
1. In the VIDOS system tree, double click on the icon for the desired VIDOS
Monitor Wall.
You will see two sub-entries, each with a hardware monitor icon.
2. Hold down the mouse button and drag Monitor 1 to the working area
(Drag&Drop).
A new window is displayed in the working area. Several monitor windows are
shown within this window:
Bosch Security Systems | 2005-09 | V1.0
EN | 11
Installation and Setup