Exercise extreme caution when using Z-Wave devices to control
appliances. Operation of the Z-Wave device may be in a different
room than the controlled appliance, also an unintentional activation
may occur if the wrong button on the remote is pressed. Z-Wave
devices may automatically be powered on due to timed event
programming. Depending upon the appliance, these unattended
or unintentional operations could possibly result in a hazardous
condition. For these reasons, we recommend the following:
Assign Z-Wave controlled appliances to device numbers
10 – 18 on the GE remote. The likelihood of unintentionally
turning on the appliance will be reduced significantly
because the "Shift" button will need to be pressed before
pressing device numbers 10-18.
Z-Wave devices controlling appliances should be removed
from "All" control setting. Instructions on how to do this
are included in the manual for your GE remote.
Do Not include Z-Wave devices in Groups or Scenes if they
Do Not use Z-Wave devices to control electric heaters or
any other appliances which may present a hazardous
condition due to unattended or unintentional or automatic
power on control.
Double check programs for accuracy before using them.
RISK OF FIRE
RISK OF ELECTRICAL SHOCK
RISK OF BURNS