Download  Print this page

GE Z-Wave 45606 Manual page 16

Wireless lighting control on/off/dim dimmer switch
Hide thumbs

Advertisement

Table of Contents
1. When Receiving a Z-Wave Dim Command
- Parameter 7 (number of steps or levels)
- Parameter 8 (timing of the steps)
- Length: 1 Byte
Valid Values:
Parameter 7 (default = 1) Valid Values: 1-99
Parameter 8 (default = 3) Valid Values: 1-255
2. Manual Control Dimming (pressing the Dimmer's rocker)
- Parameter 9 (number of steps or levels)
- Parameter 10 (timing of the steps)
- Length: 1 Byte
Valid Values:
Parameter 9 (default = 1) Valid Values: 1-99
Parameter 10 (default = 3) Valid Values: 1-255
3. When Receiving an All-On or All-Off Command
- Parameter 11 (number of steps or levels)
- Parameter 12 (timing of the steps)
- Length: 1 Byte
Valid Values:
Parameter 11 (default = 1) Valid Values: 1-99
Parameter 12 (default = 3) Valid Values: 1-255
Ignore Start Level When Receiving Dim Commands
Please note: Every "Dim" command includes a start level
embedded in it.
The 45606 can be set to ignore the start level that is part of the
dim command. Setting parameter 5 to a value of 0 will cause the
45606 to dim or brighten from the start level embedded in the
command.
- Parameter No: 5
- Length: 1 Byte
- Valid Values = 0 or 1 (default 1)

Hide quick links:

Advertisement

Table of Contents
loading

  Related Manuals for GE Z-Wave 45606