Materials And Basic Tools Needed; Materials Needed; Basic Tools - Kenmore 153.331762 Use & Care Manual

MATERIAlS AND BASIC TOOlS NEEDED

MATERIAlS NEEDED

To simplify the installation Sears has available the installation parts shown below. You may or may not need all of these materials,
depending on your type of installation.

BASIC TOOlS

You may or may not need all these tools, depending on your
type of installation. These tools can be purchased at your local
Sears Store.
• Pipe Wrenches (2) 14" (356 mm)
• Screwdriver
• Tin Snips
• 6' (1.82 m) Tape or Folding Ruler
• Garden Hose
• Drill
• Pipe Dope or Teflon Tape
SlOT-HEAD SCREwDRIVER
PHIllIPS SCREwDRIVER
ROll OF TEFlON
TAPE (USE ONlY ON
wATER HEATER
CONNECTIONS)
GARDEN HOSE 6 FOOT TAPE
METAl DRAIN PANS AVAIlABlE IN
20" (508 mm) DIAMETER FOR wATER
HEATERS HAVING A DIAMETER 18" (457
mm) OR lESS, 24" (610mm) DIAMETER
F O R wAT E R H E AT E R S H AV I N G A
DIAMETER 22" (559 mm) OR lESS AND
AVAIlABlE IN 28" (711 mm) DIAMETER
F O R wAT E R H E AT E R S H AV I N G A
DIAMETER 26" (660 mm) OR lESS
EXPANSION TANKS FOR THERMAl EXPANSION
CONDITIONS AVAIlABlE IN 2 GAllONS
(7.6 lITERS) AND 5 GAllONS (18.9 lITERS)
CAPACITY THROUGH lOCAl SEARS STORE OR
SERVICE CENTER
DRIll
TIN SNIPS
PIPE DOPE
(SQUEEZE TUBE)
USE FOR wATER AND GAS
CONNECTIONS
PIPE wRENCH
Additional Tools Needed
when Sweat Soldering
• Tubing Cutters or Hacksaw
• Propane Torch
• Soft Solder
• Solder Flux
• Emery Cloth
• Wire Brushes
TUBING CUTTER
HACKSAw
3/4" (19 mm) WIRE BRUSH
1/2" (13 mm) WIRE BRUSH
7
PROPANE
TORCH
ROll OF
EMERY ClOTH
ROll OF lEAD-FREE SOlDER
SOFT SOlDER FlUX