Brother MFC-8420 Quick Setup Manual page 43

L
Click Next.
See the For Administrator section of this
guide or the NC-9100h User's Guide located
on the CD-ROM for more network
configuration information.
M
®
95/NT Users ➝ Go to
Windows
®
Windows 98/98SE/Me/2000/XP Users:
Select yes and then click Next.
N
Click Next or enter the name you want
displayed on the LCD for your PC and then
click Next.
The default name is the name of your PC.
You can avoid receiving unwanted
documents by setting a 4-digit PIN Number.
Please wait for the window to open.
O
The README.WRI file will be displayed.
Please read this file for troubleshooting
information and then close the file to
continue installation.
P
Click Finish to restart your computer.
Windows
follow step
The Network Scanning feature is not
supported in Windows
P
For Windows
The Brother PC-FAX, Printer and
Scanner drivers have been installed
and the installation is now complete.
Q
After the computer restarts, click Yes to
have the Control Center load each time
Windows
will appear as an icon in the task tray.
If you click No the Scan keys on the MFC
will be disabled.
Even if you select No, you will be able to
launch the Brother Control Center later to
use the Scan key by double clicking the
Smart UI icon on the desktop. This loads the
Brother Control Center to the task tray. See
AutoLoad the Brother Control Center,
Chapter 14 in the Documentation (User's
Guide) located on the CD-ROM.
For Windows
The Brother PC-FAX, Printer and
Scanner drivers have been installed
and the installation is now complete.
For Windows
The Brother PC-FAX and Printer drivers
have been installed and the installation
is now complete.
®
95/98/98SE/Me/NT/2000 Users
Q
.
®
95 or NT.
®
XP Users Only
®
is started. The Control Center
®
98/98SE/Me/2000 Users
®
95/NT Users
40