Brother MFC-8420 Quick Setup Manual page 31

M
Click Yes to have the Control Center loaded
each time Windows
Center will appear as an icon in the task
tray.
If you click No the Scan keys on the MFC
will be disabled.
Even if you select No, later you will be able
to launch the Brother Control Center to use
the Scan key by double clicking the Smart UI
icon on the desktop. This loads the Brother
Control Center to the task tray. See
AutoLoad the Brother Control Center,
Chapter 14 in the Dcumentation (User's
Guide) located on the CD-ROM.
A Basic Universal printer driver was
installed with the MFL-PRO Software
Suite which is certified for use with
Windows operating systems.
Brother also offers a full featured
printer driver (Native driver) that
includes more features than the Basic
Universal driver. However, this driver
does not include a Windows certificate.
To install the Brother Native driver
proceed to step
For details on what features are available
see chapter 12 of the User's Guide.
®
is started. The Control
N
.
Brother Native driver Installation
N
Click Start and select Settings and then
Printers. Click on Add a printer and the
Add Printer Wizard will start.
When this screen appears, click Next.
O
Un-check the Automatically detect and
install my Plug and Play printer selection
and then click Next.
P
Select BMFC (Brother MFL Port) from the
pull down window for the Printer Port
Selection and then click Next.
Continued ...
28