ClearSounds CSC600ER User Manual page 16

Connect
2.
Hold the ClearSounds wall mount bracket (
with the raised mounting pins facing you. Orient
the bracket so that the opening is at the bottom.
3. Run
and push excess cord behind the plate.
4. Attach
a. Line up the keyholes on back of the phone
with the raised mounting pins on
b. Pull
c. Slide
5. Connect
6. Slide
To simply hang the phone on the wall
This method requires two self-tapping screws (not
included).
1. Locate a wall location within 6 feet of a telephone
jack wall plate and within 9 feet of an AC power
outlet.
2. Install the screws on the wall in a vertical line, at
a distance of 3.15 inches from each other.
14
through the opening on
to the phone:
toward the phone.
upward until it is securely seated.
to
over the phone jack wall plate.
on the wall.
)
,
.