Calibrating Devices - Lowrance HDS-5 Operation Manual

Settings
To configure device location:
1. Select a device from the device list and press enTeR. The Device
Information screen will appear.
2. Highlight the Configure button and press enTeR. The Device
Configuration screen will appear.
3. Highlight the Location dropdown menu and press enTeR.
4. Select the desired location and press enTeR.
Instance
You can change a device instance from the Device Configuration screen. This,
however, should only be attempted by a qualified technician.

Calibrating devices

Several devices can be calibrated from the devices list including Fluid Levels, Fuel
Flows and Trim Tabs. Every device that can be calibrated from the devices list, will
have a calibrate button on the Device Information screen. The calibrate button opens
the Device Calibration screen, which has onscreen calibration instructions for the
device.
Calibrate button
To access calibration instructions:
1. Select the desired device from the device list and press enTeR.
2. Highlight the Calibrate button on the Device Information screen and
press enTeR. Follow the onscreen calibration instructions.
NOTE: For more information on device calibration, refer to
the documentation that came with your device.
Calibration instructions for a
fluid level
106