INSTALLATION
Continued
18
C. MOUNTING HEATER WITH OPTIONAL HEARTH BASE TO OPTIONAL
MANTEL (The following instructions are for GMF800(A)/GMU801(A) mod-
els only. For other mantels, see instructions included with mantel kit.)
Assembling Mantel
Only use the optional mantels specified in this manual. See Accesso-
IMPORTANT:
ries, page 34 for proper mantel kits. This heater is only approved for use with
models GMF800(A)/GMU801(A), GM900F/GM901U, and GM700F/GM701U
mantel kits. Using any other mantel will void the A.G.A. approval for this heater.
Only use models GMF800(A)/GMU801(A), GM900F/GM901U, and GM700F/
GM701U mantels with this heater. Do not use models GMF800(A)/GMU801(A),
GM900F/GM901U, and GM700F/GM701U mantels with any other product.
Before installing mantel to heater, the heater must be mounted on the optional
hearth base.
Tools needed: #2 Phillips screw driver, electric drill, and 1/8" drill bit.
The optional mantel kit contains the following:
Right Side
Left Side
Top (with sliding access panel)
Follow the illustrated steps in Figures 20 and 21 below to assemble the mantel.
Assemble mantel upside down. The illustrations below are viewed from the rear of
the mantel. After assembling mantel, see page 19 for instructions to attach mantel
to heater.
Left Side
Mantel
Front
Figure 20
Rear Brace
Mantel Front
Right Side
Rear
Brace
Top
12 Wood Screws
2 Screws (2")
2 Wood Plugs
Figure 21
101048