Master Vent-Free Gas Log Propane Gas Space Heater Owner's Operation And Installation Manual page 17

INSTALLATION
Continued
101048
Mounting Heater to Optional Hearth Base
1. Lay heater on its back on a table with the bottom of heater overhanging the edge
of the table.
2. Remove 2 shipping screws in bottom of heater. Discard shipping screws.
3. Line up mounting holes on top of hearth base with holes in bottom of heater (see
Figure 18).
4. Using a Phillips screwdriver, secure hearth base to heater with four sheet metal
screws (see Figure 18).
Bottom of Heater
Base
Shipping
Screw
Holes for Securing
Heater to Floor
Figure 18 - Attaching Heater to Hearth Base
5. Stand heater up on base.
6. Slide laminate sheet into hearth insert. Place hearth insert on front of hearth base
as shown in Figure 19 below.
7. Assemble brass trim (see steps 1 through 7 under Assembling and Attaching
Brass Trim, page 7).
8. Slide base trim on heater base. Attach brass trim to base with two brass screws
included as shown in Figure 19 below.
Laminate
Sheet
Figure 19 - Placing Hearth Insert on Heater Base
Sheet Metal
Screw
and Attaching Brass Base Trim
Mounting Holes
Hearth
Insert
Screw
Brass Base
Trim
Continued
17