Advertisement
1. Make sure your input AC voltage conforms to the adaptor specifications.
( Tolerance never more than 5%, such as 230 VAC +/- 10 VAC )
( With 230 VAC adaptor the input voltage can not be less than 220 VAC)
2. Only use the power adapter provided with the I9058D. If you use your own
adaptor, make sure the power output is 9V DC, 300 mA centre positive.
3. With direct line-of-sight, the maximum range of A/V signal transmission can reach up
to about 60 metres, and this distance would be shortened by obstacles or walls
placed between transmitter and receiver. (The optimum indoor range is under 25 M)
4. To ensure good infrared remote control operation aim your remote control at the I/R
Sensor Window on the
it may be necessary to press and hold each button for about a second). The working
angle of the I/R Sensor Window is +/- 15 degrees. (see Pictures 7,8,)
5. The remote controller has to be used within the distance of ( from remote control
to receiver )not less than 0.3M and no more than 5M (working angle +/- 15 degrees).
(see Pictures 9)
6. Be sure the ON / OFF switch on both the transmitter and receiver is in the OFF
position before making any connections.
USER GUIDE
I9058D
and press the buttons firmly. ( With some remote controls
5
Advertisement
