Summary of Contents for Crest Audio I9058D
- Page 1 5.8GHz Wireless, DUAL INPUT Audio/Video/S-Video Sender With Built-in Remote Control Extender MODEL: I9058D OWNERS MANUAL Made in China...
-
Page 2: Table Of Contents
Caution ....….……………...…………………...12 Specifications ....….………………..………..…………13 ABOUT THE I9058D I9058D is a powerful wireless A/V/S-Video signal sender and receiver system which can be operated with Pay TV receivers, camcorders, stereo systems, televisions, DVD Players and VCRs, and provide superior reception at distances up to 60 Metres (clear line of sight) from the transmitter. -
Page 3: Location Of Controls And Accessories
LOCATION OF CONTROLS I9580D has been carefully engineered and manufactured to give you dependable operation. Read this manual before operating this unit to become familiar with its features and obtain the performance that will bring you enjoyment for many years. Please retain this manual for future reference. -
Page 4: Installation
3. Infrared Extender x 1 4. RCA to RCA Cable x2 5. 1x 3.5mm to RCA cable INSTALLATION I9058D can be used for 2 different video sources. Please follow the instruction carefully TRANSMITTER Connect main signal source a. By Composite Video(RCA) 1. - Page 5 “STANDBY Mode”, it still with Video output (BLUE BACKGROUND). So when you want to change the video source of I9058D, you need to make sure the previous video device is totally “OFF”. Otherwise, you will not to change the source.
-
Page 6: User Guide
( With 230 VAC adaptor the input voltage can not be less than 220 VAC) 2. Only use the power adapter provided with the I9058D. If you use your own adaptor, make sure the power output is 9V DC, 300 mA centre positive. -
Page 7: Referring Pictures
TROUBLE SHOOTING No picture or sound Check the power on/off switches on the Transmitter, Receiver and TV b) Make sure the power plug and signal cables are pushed all the way in. c) Check if the channel of transmitter & receiver are set to the same channel. d) Make sure that all cables are connected as per the user guide e) Check if there is any discontinuity inside the cable. - Page 8 1) To ensure good infrared remote control operation aim your remote control at the I/R Sensor Window on the I9058D and press the buttons firmly. (With some remote controls it may be necessary to press and hold each button for about a second). The working angle of the I/R Sensor Window is +/- 15 degrees.
- Page 9 Transmitter Pictures 1-1 Back View ON/OFF Switch Pay TV S-VIDEO CABLE RCA CABLE Power Adaptor S-Video OUT A/V OUT Back View of Video device Pictures 1-2 Front View ON/OFF Switch Pay TV RCA CABLE S-Video OUT A/V OUT Back View of Video device...
- Page 10 Pictures 2 Main Back View ON/OFF Switch IR OUT Second Make sure you stick the extender in front of the Infrared Receiving Sensor(Approx. within 50 mm, +/-15 degrees) the closer the better without covering the inferred window. Receiver Pictures 3 Back View ON/OFF Switch S-VIDEO CABLE...
- Page 11 Pictures 4 Transmitter Receiver Channel selection button (must be set to same channel on both transmitter & receiver) Pictures 5 Transmitter Receiver Side with dimples Turn the side with dimples face to face to obtain the best performance. Be careful when try to turn the direction.
- Page 12 Pictures 7 Receiver IR Receiver In order to obtain the best performance of IR receiving. Please be sure this unit is Side View a little forward to the TV OPERATING REMOTE CONTROL Pictures 8 Receiver IR sensor window Remote Control Pictures 9 Receiver 0.3M...
-
Page 13: Caution
IMPORTANT SAFETY PRECAUTIONS To prevent fire or shock hazard, do not submerge or expose these products to water. To avoid electric shock, do not open these units. The I9058D contains no user serviceable parts. Doing so will void the warranty... -
Page 14: Specifications
SPECIFICATION TRANSMITTER Output level 0~13dBm micro-volts/meter @ 3 meters (complies with CE) Operating frequency 5725MHz – 5875MHz Channel Selection Via Push button on the front panel, 8CH Modulation FM (Video and Audio) Video input level 1.0 V p-p Audio input level 1.0 V p-p S-Video Input Level Y:1Vpp+-10%, C:288mV +-5%...
Need help?
Do you have a question about the I9058D and is the answer not in the manual?
Questions and answers