Installation; Installation Generalities; Generalities; Installation On A Piece Of Furniture - Bosch NurseCall Main Unit User Manual

16 en | Installation
3.2

Installation

3.2.1

Generalities


Tools required:
–
–
3.2.2

Installation on a piece of furniture

It is recommended to place the NurseCall Main Unit on a non-slippery surface. However, do
not place anything (blanket or lace) on top of the unit.
3.2.3

Wall installation

You can fasten the NurseCall Main Unit on a smooth wall surface using two screws. The
distance between holes is 157 mm.
Power and phone line cords should be placed inside the cable channels on the bottom of the
NurseCall Main Unit.
3.2.4

Installing the antenna

1.
2.
3.
F.01U.252.699 | V1.1 | 2012.01
Install the NurseCall Main Unit in a dry place, away from any source of heat.
Torx T20 screwdriver.
Torx T10 screwdriver.
Use the straight adapter (4) for wall installation or the right angled bended adapter (3)
for installation on a piece of furniture.
2
3
Fasten the adapter (3) or (4) on the antenna connector (1).
Fasten the antenna (2) on the adapter.
User Manual
NurseCall Main Unit
2
4
1
Bosch Security Systems