Replacing The Lamp; Closing The Door - Electrolux EUF2947GOW User Manual

Table of Contents

Advertisement

Available languages

Available languages

Problem
No ice.
E1 flashes in the
temperature display
E2 flashes in the
temperature display
E3 flashes in the
temperature display
E4 flashes in the
temperature display
The lamp does not
work.
Door interferes with
ventilation grill.
Misaligned door.
DEMO appears on
the Display
As much as the advice does not lead to result, call the nearest brand-mark service.

6.1 Replacing the lamp

The appliance is equipped with a longlife
LED interior light.
Only service is allowed to replace the
lighting device. Contact your Service Cen-
ter .

6.2 Closing the door

1.
Clean the door gaskets.
Possible cause
The appliance has no
power. There is no voltage
in the mains socket.
The ice maker is not
switched on.
No water supply.
The ice channel in the
door is blocked.
The ice maker is defective. Contact service.
The ice dispenser is defec-
tive.
The lamp is defective.
The door has been open
to long.
The appliance is not level-
led.
The appliance is not level-
led.
The appliance is in dem-
onstration mode (DEMO)
2.
3.
Solution
Connect another electrical
appliance to the mains
socket. Check fuse. Con-
tact a qualified electrician.
Refer to "Ice maker func-
tion".
Carry out the necessary
measures on the water
supply. Press any button to
reset the Alarm.
Remove the obstacle.
Press any button to reset
the Alarm.
Contact service.
Refer to "Replacing the
lamp".
Close the door.
Refer to "Levelling".
Refer to "Levelling".
Keep pressed approximate-
ly 10 sec the Mode button
since a long sound of buz-
zer is heard and the Display
shut off for a short while:
appliance start works regu-
larly.
If necessary, adjust the door. Refer to
"Installation".
If necessary, replace the defective
door gaskets. Contact the Service
Center.
ENGLISH
15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Euf2947gox

Table of Contents